ZyXEL ZYWALL USG 100 User Guide - Page 103
How to Use Multiple Static Public WAN IP Addresses for LAN-to-WAN Traffic
View all ZyXEL ZYWALL USG 100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Chapter 5 Managing Traffic 3 Select the trunk as the default trunk and click Apply. 5.3 How to Use Multiple Static Public WAN IP Addresses for LAN-to-WAN Traffic If your ISP gave you a range of static public IP addresses, this example shows how to configure a policy route to have the ZyWALL use them for traffic it sends out from the LAN. 5.3.1 Create the Public IP Address Range Object Click Configuration > Object > Address > Add (in IPv4 Address Configuration) to create the address object that represents the range of static public IP addresses. In this example you name it Public-IPs and it goes from 1.1.1.10 to 1.1.1.17. ZyWALL USG100-PLUS User's Guide 103
Chapter 5 Managing Traffic
ZyWALL USG100-PLUS User’s Guide
103
3
Select the trunk as the default trunk and click
Apply
.
5.3
How to Use Multiple Static Public WAN IP Addresses
for LAN-to-WAN Traffic
If your ISP gave you a range of static public IP addresses, this example shows how to configure a
policy route to have the ZyWALL use them for traffic it sends out from the LAN.
5.3.1
Create the Public IP Address Range Object
Click
Configuration > Object > Address > Add
(in
IPv4 Address Configuration
)
to create the
address object that represents the range of static public IP addresses. In this example you name it
Public-IPs
and it goes from 1.1.1.10 to 1.1.1.17.