ZyXEL ZYWALL USG 100 User Guide - Page 76
Configuration > VPN > IPSec VPN > VPN Gateway, Create New Object > Address
View all ZyXEL ZYWALL USG 100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Chapter 4 Create Secure Connections Across the Internet Do the following to configure the L2TP VPN example: 1 Click Configuration > VPN > IPSec VPN > VPN Gateway and double-click the Default_L2TP_VPN_GW entry. Select Enable. Set My Address. This example uses a WAN interface with static IP address 172.16.1.2. Set Authentication to Pre-Shared Key and configure a password. This example uses topsecret. Click OK. 172.16.1.2 2 Click the VPN Connection tab and double-click the Default_L2TP_VPN_Connection entry. Click Create New Object > Address and create a host type address object that contains the My Address IP address you configured in the Default_L2TP_VPN_GW. The address object in this example uses the WAN interface's IP address (172.16.1.2) and is named L2TP_IFACE. Select Enable, set Application Scenario to Remote Acces and Local Policy to L2TP_IFACE, and click OK. 76 ZyWALL USG100-PLUS User's Guide