ZyXEL ZYWALL USG 100 User Guide - Page 23
Con Port Roles, 2.2.3 Con Zones
View all ZyXEL ZYWALL USG 100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Chapter 2 How to Set Up Your Network 2.2.2 Configure Port Roles Here is how to take the P5 port from the lan2 interface and add it to the dmz interface. 1 Click Configuration > Network > Interface > Port Role. 2 Under P5 select the dmz (DMZ) radio button and click Apply. 2.2.3 Configure Zones In this example you have created a WIZ_VPN tunnel through the Quick Setup - VPN Setup wizard. By default, it is assigned to the IPSec_VPN zone. Do the following to move WIZ_VPN from the IPSec_VPN zone to a new zone. 1 Click Configuration > Network > Zone and then double-click the IPSec_VPN entry. 2 Select WIZ_VPN and remove it from the Member box and click OK. ZyWALL USG100-PLUS User's Guide 23
Chapter 2 How to Set Up Your Network
ZyWALL USG100-PLUS User’s Guide
23
2.2.2
Configure Port Roles
Here is how to take the
P5
port from the lan2 interface and add it to the dmz interface.
1
Click
Configuration > Network > Interface > Port Role
.
2
Under
P5
select the
dmz (DMZ)
radio button and click
Apply
.
2.2.3
Configure Zones
In this example you have created a
WIZ_VPN
tunnel through the
Quick Setup - VPN Setup
wizard. By default, it is assigned to the
IPSec_VPN
zone. Do the following to move
WIZ_VPN
from the
IPSec_VPN
zone to a new zone.
1
Click
Configuration > Network
>
Zone
and then double-click the
IPSec_VPN
entry.
2
Select
WIZ_VPN
and remove it from the
Member
box and click
OK
.