2010 Dodge Ram 1500 Regular Cab Owner Manual - Page 111
2010 Dodge Ram 1500 Regular Cab Manual
Page 111 highlights
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109 Keyless Entry (RKE) transmitters can also be pro- 2. Adjust the driver's seat, recliner, and both sideview grammed to recall the same positions when the UN- mirrors to the desired positions. LOCK button is pressed. NOTE: Not all motors may be moved at one time. Refer NOTE: The power lumbar option is not programmable to "Seats/Eight-Way Power Seat" in this section for further information. with driver memory seats. Your vehicle was delivered with two RKE transmitters. One or both RKE transmitters can be linked to either memory position. The memory system can accommodate up to two RKE transmitters, each RKE transmitter linked to either of the two memory positions. Setting Memory Positions and Linking RKE Transmitter to Memory 3. Adjust the brake and accelerator pedals to the desired positions. 4. Turn on the radio and set the radio station presets (up to 10 AM and 10 FM stations can be set). 5. Adjust the Automatic Temperature Control (ATC) while the ATC is in Auto mode. 3 6. Press and release the SET button located on the NOTE: Each time the S (SET) button and a numbered driver's seat. button (1 or 2) are pressed, you erase the memory settings 7. Within five seconds, press and release MEMORY for that button and store new settings. button 1 or 2 on the driver's seat. The next steps must be 1. Turn the vehicle key to the ON/RUN position.