2010 Dodge Ram 1500 Regular Cab Owner Manual - Page 112

110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE performed within 10 seconds if you desire to also use a To recall the memory settings for driver one, press MEMORY button number 1 on the driver's seat or the RKE transmitter to recall memory positions. UNLOCK button on the RKE transmitter linked to 8. Turn the ignition OFF and remove the key. memory position 1. 9. Press and release the LOCK button on one of the RKE To recall the memory setting for driver two, press transmitters. MEMORY button number 2 on the driver's seat or the 10. Repeat the above steps to set the next memory UNLOCK button on the RKE transmitter linked to position using the other numbered memory button or to memory position 2. link another RKE transmitter to memory. A recall can be cancelled by pressing any of the MEMORY buttons on the driver's seat during a recall (S, Memory Position Recall 1, or 2), or pressing any one of the power seat buttons, NOTE: pressing the adjustable pedals button, or pressing either • The vehicle must be in PARK to recall the memory the LOCK or UNLOCK button on the RKE transmitter positions. when not in the ignition switch. When a recall is can• Not all motors may be moved at one time. Refer to the celled, the driver's seat and the pedals stop moving. A "Seats/Eight-Way Power Seat" in this section for fur- delay of one second will occur before another recall can be selected. ther information.