2010 Dodge Ram 1500 Regular Cab Owner Manual - Page 523

MAINTAINING YOUR VEHICLE 521 tailgate, sliding doors and hood hinges, should be lubricated periodically with a lithium based grease, such as MOPAR௡ Spray White Lube or equivalent, to assure quiet, easy operation and to protect against rust and wear. Prior to the application of any lubricant, the parts concerned should be wiped clean to remove dust and grit. After lubricating, excess oil and grease should be removed. Particular attention should also be given to hood latching components to ensure proper function. Front Driveshaft Lubrication - 2500/3500 When performing other underhood services, the hood (Four-Wheel Drive) Models (Ram Trucks Only) latch, release mechanism and safety catch should be Lubricate the front driveshaft grease fitting at each oil cleaned and lubricated. change. Refer to "Maintenance Schedule" for further information. Use MOPAR௡ Type MS-6560 (lithium-based The external lock cylinders should be lubricated twice a year, preferably in the Fall and Spring. Apply a small grease), or equivalent. amount of a high quality lubricant, such as MOPAR௡ Body Lubrication Lock Cylinder Lubricant or equivalent directly into the Locks and all body pivot points, including such items as lock cylinder. seat tracks, door hinge pivot points and rollers, liftgate, Refrigerant Recovery and Recycling R-134a Air Conditioning Refrigerant is a hydrofluorocarbon (HFC) that is endorsed by the Environmental Protection Agency (EPA) and is an ozone-saving product. However, the manufacturer recommends that air conditioning service be performed by authorized dealers or other service facilities using recovery and recycling equipment. 7