2010 Dodge Ram 1500 Regular Cab Owner Manual - Page 220

218 UNDERSTANDING YOUR INSTRUMENT PANEL unbuckled, the seat belt reminder light will flash or remain on continuously. Refer to "Occupant Restraints" in "Things To Know Before Starting Your Vehicle" for further information. 32. Charging System Light This light shows the status of the electrical charging system. The light should come on when the ignition switch is first turned ON and remain on briefly as a bulb check. If the light stays on or comes on while driving, turn off some of the vehicle's non-essential electrical devices or increase engine speed (if at idle). If the charging system light remains on, it means that the vehicle is experiencing a problem with the charging system. Obtain SERVICE IMMEDIATELY. See an authorized dealer. For vehicles equipped with a premium cluster this indicator will display in the Electronic Vehicle Information Center (EVIC). Refer to "Electronic Vehicle Information Center (EVIC) - If Equipped" for further information. 33. Electronic Stability Program (ESP) Indicator Light / Brake Assist System (BAS) Warning Light - If Equipped The malfunction light for the Electronic Stability Program (ESP) is combined with Brake Assist System (BAS). The yellow "ESP/BAS Warning Light" comes on when the ignition switch is turned to the "ON" position. They should go out with the engine running. If the "ESP/BAS Warning Light" comes on continuously with the engine running, a malfunction has been detected in either the ESP or the BAS system. If this light remains on after several ignition If jump starting is required, refer to "Jump Starting cycles, and the vehicle has been driven several miles Procedures" in "What To Do In Emergencies". (kilometers) at speeds greater than 30 mph (48 km/h), see an authorized dealer as soon as possible.