2010 Dodge Ram 1500 Regular Cab Owner Manual - Page 457
2010 Dodge Ram 1500 Regular Cab Manual
Page 457 highlights
STARTING AND OPERATING 455 The user interface consists of the following: GAIN/ Brake Output Power Display Shows the current GAIN setting. lever is activated while the brake is also applied, the greater of the two inputs determines the power sent to the trailer brakes. The trailer and the vehicle's brake lamps will come on This display may also be used to display diagnostic when either vehicle braking or manual trailer brakes are information, if needed. applied. • SC - Short Circuit to Ground Trailer Brake Status Indicator Light This light indicates the trailer electrical connection status. • Sb - Short to Battery • CF - Controller Fault - If this message appears on the If no electrical connection is detected after the ignition is display, see your authorized dealer. turned on, pressing the GAIN adjustment button or sliding the manual brake control lever will display the When the vehicle brakes are applied, the display will no GAIN setting for 10 seconds and the "Trailer Brake Status longer show GAIN and will change to the output to the Indicator Light" will not be displayed. trailer brakes. If a fault is detected in the trailer wiring or the Integrated Manual Brake Control Lever Trailer Brake Module (ITBM), the "Trailer Brake Status Slide the manual brake control lever to the right to Indicator Light" will flash. activate power to the trailer's electric brakes independent of the tow vehicle's brakes. If the manual brake control 5