2010 Dodge Ram 1500 Regular Cab Owner Manual - Page 465
2010 Dodge Ram 1500 Regular Cab Manual
Page 465 highlights
STARTING AND OPERATING 463 Before Plowing • Check the hydraulic system for leaks and proper fluid 3. Cargo capacity will be reduced by the addition of level. options or passengers, etc. • Check the mounting bolts and nuts for proper tightThe loaded vehicle weight, including the snowplow ness. system, all aftermarket accessories, driver, passengers, • Check the runners and cutting edge for excessive wear. options, and cargo, must not exceed either the Gross The cutting edge should be 1/4 to 1/2 in (6 cm to Vehicle Weight (GVWR) or Gross Axle Weight (GAWR) 1.2 cm) above ground in snow plowing position. ratings. These weights are specified on the Safety Com• Check that snowplow lighting is connected and func- pliance Certification Label on the driver's side door opening. tioning properly. Snowplow Prep Package Model Availability NOTE: Detach the snowplow when transporting pasFor Information about snowplow applications visit sengers. www.dodge.com or refer to the current Dodge Body Vehicle front end wheel alignment was set to specificaBuilders Guide. tions at the factory without consideration for the weight 1. The maximum number of occupants in the truck of the plow. Front end toe-in should be checked and reset should not exceed two. 2. The total GVWR or the Front GAWR or the Rear GAWR should never be exceeded. 5