2010 Dodge Ram 1500 Regular Cab Owner Manual - Page 23
2010 Dodge Ram 1500 Regular Cab Manual
Page 23 highlights
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 To Unlock the Doors Press and release the UNLOCK button on the RKE transmitter once to unlock the driver's door, or twice within five seconds to unlock all doors. The turn signal lights will flash to acknowledge the unlock signal. The illuminated entry system will also turn on. Remote Key Unlock, Driver Door/All Doors First This feature lets you program the system to unlock either the driver's door or all doors on the first press of the UNLOCK button on the RKE transmitter. To change the current setting, proceed as follows: • For vehicles equipped with the EVIC, refer to "Electronic Vehicle Information Center (EVIC)/CustomerProgrammable Features (System Setup)" in "Understanding Your Instrument Panel" for further information. 1. Press and hold the LOCK button on a programmed RKE transmitter for at least four seconds, but no longer than ten seconds. Then, press and hold the UNLOCK button while still holding the LOCK button. 2. Release both buttons at the same time. 3. Test the feature while outside of the vehicle by pressing the LOCK/UNLOCK buttons on the RKE transmitter with the ignition switch in the OFF position and the key removed. 4. Repeat these steps if you want to return this feature to its previous setting. 2 NOTE: Pressing the LOCK button on the RKE transmitter while you are inside the vehicle will activate the Vehicle Security Alarm System. Opening a door with the Vehicle Security Alarm System activated will cause the alarm to sound. Press the UNLOCK button to deactivate • For vehicles not equipped with the EVIC, perform the the Vehicle Security Alarm System. following procedure: