2010 Dodge Ram 1500 Regular Cab Owner Manual - Page 140
2010 Dodge Ram 1500 Regular Cab Manual
Page 140 highlights
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • When you turn ParkSense off, the instrument cluster will display "PARK ASSIST DISABLED." Furthermore, once you turn ParkSense off, it remains off until you turn it on again, even if you cycle the ignition • key. • When you move the shift lever to the REVERSE position and ParkSense is turned off, the instrument cluster will display "PARK ASSIST DISABLED" message for as long as the vehicle is in reverse. Information Center (EVIC) after making sure the rear bumper is clean and free of snow, ice, mud, or other debris, see your authorized dealer. Clean the ParkSense sensors regularly, taking care not to scratch or damage them. The sensors must not be covered with ice, snow, slush, mud, dirt, or debris. Failure to do so can result in the system not working properly. The ParkSense system might not detect an obstacle behind the bumper, or it could provide a false indication that an obstacle is behind the bumper. • ParkSense, when on, will MUTE the radio when it is • Objects must not be within 12 in (30 cm) from the rear sounding a tone. bumper while driving the vehicle. Failure to do so can • If a ParkSense system malfunction occurs, a single result in the system misinterpreting a close object as a chime will sound once per ignition cycle. In addition, sensor problem, causing the "CLEAN PARK ASSIST the Electronic Vehicle Information Center (EVIC) will SENSORS" message to be displayed in the instrument display "CLEAN PARK ASSIST SENSORS" and the cluster. LED in the ParkSense switch will illuminate. If this message continues to appear in the Electronic Vehicle