2010 Dodge Ram 1500 Regular Cab Owner Manual - Page 212

210 UNDERSTANDING YOUR INSTRUMENT PANEL Center (EVIC). Refer to "Electronic Vehicle Information 18. Shift Lever Indicator The Shift Lever Indicator is self-contained within the Center (EVIC) - If Equipped" for further information. instrument cluster. It displays the gear position of the 20. High Beam Indicator automatic transmission. This indicator shows that headlights are on high NOTE: In vehicles with 4.7L or 5.7L engines, the highest beam. Push the multifunction lever forward to available transmission gear is displayed in the lower switch the headlights to high beam, and pull toward right corner of the Electronic Vehicle Information Center yourself (normal position) to return to low beam. (EVIC) whenever the Electronic Range Select (ERS) fea21. Voltmeter ture is active. Use the +/- selector on the shift lever to When the engine is running, the gauge indicates the activate ERS. Refer to "Automatic Transmission" in electrical system voltage. The pointer should stay within "Starting And Operating" for further information. the normal range if the battery is charged. If the pointer moves to either extreme left or right and remains there 19. Low Fuel Light When the fuel level reaches approximately 3.0 gal during normal driving, the electrical system should be (11.0 L) this light will turn on, and remain on until serviced. fuel is added. NOTE: The voltmeter may show a gauge fluctuation at For vehicles equipped with a premium cluster this indi- various engine temperatures. This cycling operation is cator will display in the Electronic Vehicle Information caused by the post-heat cycle of the intake manifold heater system. The number of cycles and the length of the