2010 Dodge Ram 1500 Regular Cab Owner Manual - Page 30

28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Exit Remote Start Mode and Drive the Vehicle Before the end of the 15-minute cycle, press and release the UNLOCK button on the RKE transmitter to unlock the doors and disarm the Vehicle Security Alarm System (if equipped). Insert the Key Fob into the ignition switch and turn the switch to the ON/RUN position. turn on in cold weather. In warm weather, the driver vented seat feature will automatically turn on when the remote start is activated. These features will stay on through the duration of remote start or until the ignition switch is turned to the ON position. The Remote Start Comfort System can be activated and deactivated through the Electronic Vehicle Information NOTE: • The ignition switch must be in the ON/RUN position Center (EVIC). For more information on Remote Start Comfort System operation refer to "Electronic Vehicle in order to drive the vehicle. Information Center (EVIC)/Customer-Programmable • For vehicles equipped with the Electronic Vehicle Features (System Setup)" in "Understanding Your InstruInformation Center (EVIC), the message "Insert Key/ ment Panel". Turn To On" will flash in the EVIC until you insert the Key Fob into the ignition swich. Once inserted, the DOOR LOCKS message "Turn To On" will flash in the EVIC until you Manual Door Locks turn the ignition switch to the ON/RUN position. Front and rear doors may be locked by moving the lock Remote Start Comfort Systems - If Equipped plunger down or unlocked by moving the lock plunger When remote start is activated, the heated steering up. wheel, and driver heated seat features will automatically