2010 Dodge Ram 1500 Regular Cab Owner Manual - Page 24
2010 Dodge Ram 1500 Regular Cab Manual
Page 24 highlights
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Flash Lamps with Remote Key Lock This feature will cause the turn signal lights to flash when the doors are locked or unlocked with the RKE transmitter. This feature can be turned on or turned off. To change the current setting, proceed as follows: • For vehicles equipped with the EVIC, refer to "Electronic Vehicle Information Center (EVIC)/CustomerProgrammable Features (System Setup)" in "Understanding Your Instrument Panel" for further information. 3. Test the feature while outside of the vehicle by pressing the LOCK/UNLOCK buttons on the RKE transmitter with the ignition switch in the OFF position and the key removed. 4. Repeat these steps if you want to return this feature to its previous setting. NOTE: Pressing the LOCK button on the RKE transmitter while you are in the vehicle will activate the Vehicle Security Alarm System. Opening a door with the Vehicle Security Alarm System activated will cause the alarm to • For vehicles not equipped with the EVIC, perform the sound. Press the UNLOCK button to deactivate the following procedure: Vehicle Security Alarm System. 1. Press and hold the UNLOCK button on a programmed RKE transmitter for at least four seconds, but no longer than ten seconds. Then, press and hold the LOCK button while still holding the UNLOCK button. 2. Release both buttons at the same time. To Lock the Doors Press and release the LOCK button on the RKE transmitter to lock all doors. The turn signal lights will flash and the horn will chirp to acknowledge the signal.