2010 Dodge Ram 1500 Regular Cab Owner Manual - Page 150

148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 6. Firmly press and release the LEARN or TRAINING Gate Operator/Canadian Programming button. The name and color of the button may vary by Canadian radio-frequency laws require transmitter signals to "time-out" (or quit) after several seconds of manufacturer. transmission - which may not be long enough for NOTE: You have 30 seconds in which to initiate the next HomeLink௡ to pick up the signal during programming. step after the LEARN button has been pressed. Similar to this Canadian law, some U.S. gate operators are 7. Return to the vehicle and press the programmed designed to "time-out" in the same manner. HomeLink௡ button twice (holding the button for two It may be helpful to unplug the device during the cycling seconds each time). If the device is plugged in and process to prevent possible overheating of the garage activates, programming is complete. door or gate motor. If the device does not activate, press the button a third If you are having difficulties programming a garage door time (for two seconds) to complete the training. opener or a gate operator, replace "Programming If you have any problems, or require assistance, please HomeLink" Step 3 with the following: call toll-free 1-800-355-3515 or, on the Internet at 3. Continue to press and hold the HomeLink௡ button, www.HomeLink.com for information or assistance. while you press and release ("cycle"), your handheld To program the remaining two HomeLink௡ buttons, transmitter every two seconds until HomeLink௡ has repeat each step for each remaining button. DO NOT erase the channels.