2010 Dodge Ram 1500 Regular Cab Owner Manual - Page 229
2010 Dodge Ram 1500 Regular Cab Manual
Page 229 highlights
UNDERSTANDING YOUR INSTRUMENT PANEL 227 to turn off the message. If the problem continues, the Unless reset, this message will continue to display each message will appear the next time the vehicle is started. time you turn the ignition switch to the ON position. To turn off the message temporarily, press and release the A loose, improperly installed, or damaged fuel filler cap RETURN button. To reset the oil change indicator system may also turn on the Malfunction Indicator Light (MIL). (after performing the scheduled maintenance) perform the following steps. Oil Change Due Your vehicle is equipped with an engine oil change 1. Turn the ignition switch to the ON position. (Do not indicator system. The Oil Change Due message will start the engine) flash in the EVIC display for approximately 10 seconds after a single chime has sounded to indicate the next 2. Fully depress the accelerator pedal slowly three times scheduled oil change interval. The engine oil change within 10 seconds. indicator system is duty-cycle based, which means the 3. Turn the ignition switch to the OFF position. engine oil change interval may fluctuate dependent upon your personal driving style. NOTE: If the indicator message illuminates when you start the engine, the oil change indicator system did not reset. If necessary, repeat these steps. 4