2010 Dodge Ram 1500 Regular Cab Owner Manual - Page 473
2010 Dodge Ram 1500 Regular Cab Manual
Page 473 highlights
STARTING AND OPERATING 471 17. Release the parking brake. NOTE: • The transfer case cannot be shifted into NEUTRAL Returning to Normal Operation - Electronic Shift from the 4WD AUTO (if equipped) position. Transfer Case Use the following procedure to prepare your vehicle for • Steps 1 through 5 are requirements that must be met normal usage: prior to pressing the NEUTRAL button, and must continue to be met until the four seconds elapses and 1. Bring the vehicle to a complete stop, leaving it conthe shift has been completed. If any of these require- nected to the tow vehicle. ments are not met prior to pressing the NEUTRAL 2. Firmly apply the parking brake. button or are no longer met during the four second timer, then the NEUTRAL indicator light will flash 3. Insert the key fob into the ignition switch and turn it to continuously until all requirements are met or until the the ON position, but do not start the engine. NEUTRAL button is released. 4. Press and hold the brake pedal. • The ignition switch must be in the ON position for a 5. Shift the transmission into NEUTRAL. shift to take place and for the position indicator lights to be operable. If the ignition switch is not in the ON 6. Press and hold the transfer case switch NEUTRAL position, the shift will not take place and no position button for one second. indicator lights will be on or flashing. • The flashing NEUTRAL indicator light indicates that shift requirements have not been met. 5