2010 Dodge Ram 1500 Regular Cab Owner Manual - Page 148
2010 Dodge Ram 1500 Regular Cab Manual
Page 148 highlights
146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Programming HomeLinkா Before You Begin If you have not trained any of the HomeLink buttons, erase all channels before you begin training. For optimal training, point the battery end of the handheld transmitter away from the HomeLink To do this, press and hold the two outside buttons for 20 seconds. The EVIC will display "CLEARING CHAN- 3. Simultaneously press and hold both the chosen NELS". Release the buttons when the EVIC message HomeLink button and the handheld transmitter button until the EVIC display changes from "CHANNEL # states "CHANNELS CLEARED". TRAINING" to "CHANNEL # TRAINED". It is recommended that a new battery be placed in the handheld transmitter of the device being copied to Then release both the HomeLink and handheld transHomeLink for more efficient training and accurate mitter buttons. transmission of the radio-frequency signal. If the EVIC display states "DID NOT TRAIN" repeat It is also advised to park outside the garage while Step 3. If the signal is too weak, replace the battery in the training. handheld transmitter. 1. Turn the ignition switch to the ON/RUN position. It may take up to 30 seconds or longer in rare cases. The garage door may open and close while you train. 2. Place the handheld transmitter 1 to 3 in (3 to 8 cm) from the HomeLink buttons while keeping the EVIC display in view.