2010 Dodge Ram 1500 Regular Cab Owner Manual - Page 335

STARTING AND OPERATING 333 4WD LOW Four-Wheel Drive Low Range - This range provides low speed four-wheel drive. Locks the front and rear driveshafts together forcing the front and rear wheels to rotate at the same speed. Additional traction and maximum pulling power for loose, slippery road surfaces only. Do not exceed 25 mph (40 km/h). position will remain ON, and the newly selected position indicator light will continue to flash until all the requirements for the selected position have been met. To retry a shift: return the control knob back to the original position, make certain all shift requirements have been met, wait five seconds and try the shift again. • If all the requirements to select a new transfer case N position have been met, the current position indicator Neutral - This range disengages both the front and rear light will turn OFF, the selected position indicator light driveshafts from the powertrain. To be used for flat will flash until the transfer case completes the shift. towing behind another vehicle. Refer to "Recreational When the shift is complete, the position indicator light Towing" in "Starting and Operating" for further for the selected position will stop flashing and remain information. ON. Shifting Procedure 2WD ⇔ 4WD AUTO or 4WD LOCK NOTE: Rotate the 4WD Control Switch to the desired position. • If any of the requirements to select a new transfer case Shifts between 2WD and 4WD AUTO and 4WD LOCK position have not been met, the transfer case will not can be done with the vehicle stopped or in motion. With shift. The position indicator light for the previous 5