2013 Ford Escape Warranty Supplement Printing 1 - Page 232

Maintenance Replacing Headlamp Bulbs WARNING Handle a halogen headlamp bulb carefully and keep out of children's reach. Grasp the bulb by only its plastic base and do not touch the glass. The oil from your hand could cause the bulb to break the next time the headlamps are operated. 1. 2. 3. 4. Remove the headlamp. Remove service cap. Disconnect the electrical connector. Remove bulb from the headlamp assembly by turning it counterclockwise, then pull it straight out. Low beam headlamp: Note: If the bulb is accidentally touched, it should be cleaned with rubbing alcohol before being used. Headlamp: 2 4 A B C E142471 E142469 1. 2. 3. 4. Side marker Low beam headlamp High beam headlamp A B C Remove the headlamp. Remove service cap. Disconnect the electrical connector. Remove bulb from the headlamp assembly by turning it counterclockwise, then pull it straight out. High beam headlamp: Install the new bulbs in reverse order from the steps above. Be sure that the spring clip is not damaged or detached from the headlamp assembly during the replacement procedure. 2 4 Replacing HID Headlamp Bulbs (If Equipped) The low beam headlamps on your vehicle use a high intensity discharge source. These lamps operate at a high voltage. When the bulb is burned out, the bulb and starter capsule assembly must be replaced by your authorized dealer. E142470 232