2013 Ford Escape Warranty Supplement Printing 1 - Page 327

MyFord Touch® Only the photograph(s) which meet the following conditions are displayed: • Compatible file formats are as follows: .jpg, .gif, .png, .bmp • Each file must be 1.5 MB or less. • Recommended dimensions: 800 x 384 Sound Press Menu, then Sound to access settings for: Sound Settings Bass Treble Midrange Balance and fade * THX Deep Note Demo DSP * * Occupancy Mode * Speed Compensated Volume If equipped. Rear View Camera (If Equipped) This menu allows you to access settings for your rear view camera. Press Menu, Vehicle, then Reverse Camera. Select from the following settings: • Rear Camera Delay • Guideline • Visual Park Aid Alert Changing Your Door Keypad Code (If Equipped) To change the keypad code for your keyless entry keypad system: 1. Press Menu, Vehicle, then Edit Door Keypad Code. 2. Enter your current factory code, then, when prompted, enter your new code. Valet Mode Note: If you are locked out and need to reset the PIN, you can enter 3681 and the system unlocks. Valet mode allows you to lock the system so that none of your information on the system can be accessed until it is unlocked with the correct PIN. 1. Press Menu, Vehicle, then Valet Mode. 2. Select Enable Valet Mode. 3. When prompted, enter a four-digit PIN. After you press Continue the system is locked until the correct PIN is entered again. Active Park Assist (If Equipped) When activated, your system displays directions for you regarding the active park assist process. See Active Park Assist (page 163). Settings Access and adjust system settings, voice features, as well as phone, navigation and wireless settings. Some of these settings can also be accessed with regard to their specific modes (i.e., phone and media). System Settings Press Menu, Settings, System. Select from the following: 327