Alesis iO Mix Reference Manual - Page 55

Technical Specifications

Get Alesis iO Mix PDF manuals and user guides View all Alesis iO Mix manuals
Add to My Manuals
Save this manual to your list of manuals

Page 55 highlights

Technical Specifications Audio signal is distorted. Cables not hooked up properly. Bad cable(s). Channel input gain is too high. Output levels are too high. -10/+4 input switch set incorrectly. Sound source is too loud. Check outputs to make sure cables are plugged in correctly (and securely). Check all cables; substitute cables with known good ones. Turn down the input gain knob for the distorting channel (use the LED meters to locate channels that are distorting). Turn down your audio software's output level. Be sure that the "-10/+4" input switch for each input is set correctly in the IO|14/26's control panel Turn down the output level of the sound source. If you are using a microphone with a volume "pad," engage the pad switch. 53

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
Technical Specifications
53
Cables not hooked up
properly.
Check outputs to make sure
cables are plugged in correctly
(and securely).
Bad cable(s).
Check all cables; substitute
cables with known good ones.
Audio signal is distorted.
Channel input gain is too
high.
Turn down the input gain knob
for the distorting channel (use
the LED meters to locate
channels that are distorting).
Output levels are too high.
Turn down your audio
software’s output level.
-10/+4 input switch set
incorrectly.
Be sure that the “-10/+4” input
switch for each input is set
correctly in the IO|14/26’s
control panel
Sound source is too loud.
Turn down the output level of
the sound source.
If you are
using a microphone with a
volume “pad,” engage the pad
switch.