Alpine 1004 Owners Manual - Page 12

Radio Operation SOURCE/ PWR BAND/TEL. TUNE/A.ME Tuning to Preset Stations 1 Press SOURCE/PWR to select the radio mode. 2 Press BAND/TEL. repeatedly until the desired radio band is displayed. 3 Press the station preset button that has your desired radio station in memory. The display shows the band, preset No. and frequency of the station selected. Selecting a Station from the List g f Rotary Station preset buttons encoder (1 through 6) Automatic Memory of Station Presets 1 Press SOURCE/PWR to select the radio mode. 2 Press BAND/TEL. repeatedly until the desired radio band is displayed. 3 Press and hold TUNE/A.ME for at least 2 seconds. The frequency on the display continues to change while the automatic memory is in progress. The tuner will automatically seek and store 6 strong stations in the selected band. They will be stored into presets 1 to 6 buttons in order of signal strength. When the automatic memory has been completed, the tuner goes to the station stored in the preset location No. 1. NOTE If no stations are stored, the tuner will return to the original station you were listening to before the auto memory procedure began. You can display the list of your titled stations (refer to "Titling Discs/Stations" on page 25), and select a station from this list. 1 When the monitor is open, press and hold the Rotary encoder for at least 2 seconds. The title list is displayed. 2 Press g or f to select a station from the list. 3 Press the Rotary encoder to tune in the selected station. NOTE To cancel the title list display, press and hold the Rotary encoder for at least 2 seconds. 10-EN