Alpine 1004 Owners Manual - Page 41

Other Useful Features Simultaneous Operation You can watch the video portion of another source while listening to current source. After carrying out steps 1 to 3 of "To display the SETUP screen" (page 29), perform the operation shown below. 1 Press V.SEL to select the video position. Example of when not connecting the expansion box: (Picture) →RADIO∗1→ AUX∗2 → NAV. (Voice) RADIO RADIO RADIO Example 1 of when connecting the expansion box (KCE-104V): (Picture)→ RADIO∗1 → AUX1∗2 → AUX2 → AUX3∗3 (Voice) RADIO RADIO RADIO RADIO ∗4 Set SPE.ANA to ON to select the SPE.ANA display (refer to "Displaying Spectrum Analyzer" on page 38). Press TITLE to select the desired SPE.ANA mode from 1 through 6 and SCAN. ∗5 The source, disc number, elapsed time, etc., are displayed. NOTES • When AUX IN (AUX1, AUX2, AUX3) and NAV.IN are set to ON, the AUX (AUX1, AUX2, AUX3) and NAV. mode is displayed (refer to "Setting the External Input" on page 37). • To switch the sound source, press SOURCE/PWR during SIMUL. If the picture and the sound are from the same source, the SIMUL function is not canceled. 2 Press and hold V.SEL for at least 2 seconds to cancel the SIMUL function. SPE.ANA∗4 ← RADIO NAV. ← RADIO Example 2 of when connecting the expansion box (KCE-104V): ((PVoicictuer)e)→ DVD DVD → DVD∗5 → AUX2 DVD DVD SPE.ANA∗4 ← NAV. ← AUX3∗3 ← DVD DVD DVD ∗1 The source, band, frequencies, etc., are displayed. ∗2 If a DVD player or DVD changer is connected, you can receive the DVD picture/sound. DVD player (DVA-5200) is connected: Press FUNC on the remote control supplied with the DVD player. The DVD picture and sound are output. DVD player (DVA-5205) or DVD changer (DHAS680) is connected: Press and hold V. OUT on the remote control supplied with the DVD player or DVD changer for at least 2 seconds. The DVD picture and voice are output. ∗3 When the KCE-104V and a rear camera are connected, the unit can receive the picture (refer to "Setting the External Input" on page 37). 39-EN