Alpine 1004 Owners Manual - Page 29
Setting the Treble Control
View all Alpine 1004 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Operation with the monitor closed You can set the Bass control with the monitor closed. 1 Press bass engine. 2 Press preset 1. BASS is displayed for 2 seconds in the sub-display, then the value of BASS Level blinks. 3 Each time you press preset 1, the blinking shifts. Example of sub-display 4 Press g or f to adjust the selected mode. Other Useful Features Setting the Treble Control You can change the Treble Frequency emphasis to create your own tonal preference. 1 When the monitor is open, press bass engine. BASS ENGINE mode is displayed in the monitor. 2 Press preset 2 to select the desired mode. 3 Press g or f to adjust the selected mode. Treble Level : -7~+7 You can emphasize the treble frequency. Treble center frequency: → 10.0kHz ↔ 12.5kHz ↔ 15.0kHz ↔ 17.5kHz ← Emphasizes the displayed Treble frequency ranges. 4 Press bass engine to return to normal mode. NOTES • If no buttons are pressed within 10 seconds, the Treble control setting will be turned off automatically. • Depending on the type of external audio processors connected to the unit, you may not be able to set some settings. • The settings of the Treble will be individually memorized for each source (FM, AM and CD) until the setting is changed. Depending on the connected devices, some functions and display indications do not work. Operation with the monitor closed You can set the Treble control with the monitor closed. 1 Press bass engine. 2 Press preset 2. TREBLE is displayed for 2 seconds in the sub-display, then the value of TREBLE Level blinks. 3 Each time you press preset 2, the blinking shifts. Example of sub-display 4 Press g or f to adjust the selected mode. 27-EN