Alpine 1004 Owners Manual - Page 35
Setting the Clock Display, Displaying Time, Setting Time
![]() |
View all Alpine 1004 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Setting the Clock Display Other Useful Features Setting Time After carrying out steps 1 to 3 of "To display the SETUP screen" (page 29), perform the operation shown below. 1 When the monitor is open, press and hold MUTE/SETUP for at least 2 seconds. The SETUP screen appears. 2 Press preset 2 to select GENERAL setting mode. Press preset 2 again to select CLOCK DISP. 3 Press g or f to turn ON or OFF the clock display on the monitor. For any other settings, press preset 2 or another preset button. 4 After setting is completed, press MUTE/SETUP to return to normal mode. Displaying Time 1 When the monitor is closed, press TITLE repeatedly until the clock time is displayed in the sub-display. NOTES • Selecting any function while in the clock priority mode will interrupt the time display momentarily. The function selected will be displayed for about 5 seconds before the time returns to the display. • The clock time is not shown on both the monitor and the sub-display simultaneously. After carrying out steps 1 to 3 of "To display the SETUP screen" (page 29), perform the operation shown below. 1 When the monitor is open, press and hold MUTE/SETUP for at least 2 seconds. The SETUP screen appears. 2 Press preset 2 to activate GENERAL setting mode. Press preset 2 again to select CLOCK ADJ., then press -/J or g/ f to appear the clock adjusting menu. 3 Press preset 2 to select HOUR. Then press g or f to adjust the hour. 4 Press preset 2 to select MINUTE. Then press g or f to adjust the minutes. To quickly set the time to the nearest hour, press preset 2 to select MINUTE ZERO, then press -/J or g/ f. If the minutes is ":30" or under, the hour is the current number. If the minutes is more than ":30", or If you set the minute to "00", the hour is moved up. To return to the previous mode, press preset 2 to select RETURN, then press -/J, g or f. 5 After setting is completed, press MUTE/SETUP to return to normal mode. 33-EN
![](/manual_guide/products/alpine-1004-owners-manual-5035cc3/35.png)