Alpine 1004 Owners Manual - Page 14

XM Radio Operation (Optional) BAND/TEL. TITLE :/J NOTE If you store a channel in a used preset memory, the current channel will be cleared and replaced with the new one. Receiving the Stored XM Channels 1 Press SOURCE/PWR to select the XM mode. 2 Press BAND/TEL. to select XM1, XM2 or XM3. 1 9/CAT → XM1 → XM2 → XM3 3 2 8/CAT Press the channel preset button that has your desired satellite channel in memory. g f Rotary Preset buttons FUNC SOURCE/PWR encoder (1 through 6) Selecting a Channel by Category (Category Tuning) Changing the Channel Select Method There are 2 ways to select a channel: either by channel number (numeric order) or by channel name (alphabetical order). 1 In XM mode, press and hold :/J for at least 2 seconds. Each press changes the display between "CH No." and "CH NAME" on the monitor. CH No : Arranging channels in numeric order. Press g or f to find the desired channel. CH NAME : Arranging channels in alphabetical order. Press g or f to find the desired channel. Storing of XM Channel Presets 1 Press SOURCE/PWR to select the XM mode. 2 Press BAND/TEL. to select the desired band (XM1, XM2 or XM3) you want to store. 3 After tuning in the desired channel, press and hold (for at least 2 seconds) any one of the preset buttons (1 through 6) into which you want to store the channel. The selected channel is stored. 4 Repeat the procedure to store up to 5 other channels onto the same band. To use this procedure for other bands, simply select the band desired and repeat the procedure. A total of 18 channels can be stored in the preset memory (6 channels for each band; XM1, XM2 and XM3). 12-EN Channels are divided into categories. Category Tuning allows you to search for a specific channel by its category. 1 In XM mode, press FUNC to select Category Tuning mode. The currently received category is displayed and the "CATEGORY" (monitor) or "C" (sub-display) indicator is lit. 2 Press 1 9/CAT or 2 8/CAT to select the desired category. The selected category is immediately received. Holding the button will continuously change the category. 3 To search for a channel, press g or f while your selected category is displayed. The channels within the category are displayed in turn. The selected channel is immediately received. NOTE If no operation is performed within 13 seconds, or FUNC is pressed, the unit returns to normal mode.