Alpine 1004 Owners Manual - Page 6
Precautions - cva
View all Alpine 1004 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
WARNING PRECAUTIONS Temperature Be sure the temperature inside the vehicle is between +45°C (+113°F) and 0°C (+32°F) before turning your unit on. Maintenance If you have problems, do not attempt to repair the unit yourself. Return it to your Alpine dealer or the nearest Alpine Service Station for servicing. Installation Location Make sure the CVA-1004 will not be installed in a location subjected to: • Direct sun and heat • High humidity and water • Excessive dust • Excessive vibrations Handling the Detachable Front Panel • Do not expose to rain or water. • Do not drop or apply shock. Operation of some of the functions of this unit is very complex. Because of this, it was deemed necessary to place these functions into a special screen. This will restrict operation of these functions to times when the vehicle is parked. This ensures the focus of the driver's attention will be on the road and not on the CVA-1004. This has been done for the safety of the driver and passengers. The Title Input and SETUP screens cannot be made while the car is moving. The car must be parked and the parking brake must be engaged for the procedure described in the Owner's Manual to be valid. These operations are not possible while you are driving. Also if you attempt to drive during operation, the display will show the warning "CAN'T OPERATE WHILE DRIVING" for 5 seconds and then the operation mode will be canceled. This operation is the same as when selecting sources using the remote control. When the car is parked, the selection is made as described in the Owner's Manual. Alpine products equipped with the Ai-NET bus, connected to the CVA-1004, can be operated from the CVA-1004. Depending on the products connected, the functions and displays will vary. For details, consult your Alpine dealer. 4-EN