Alpine 1004 Owners Manual - Page 32

Other Useful Features Adjusting Tint of Picture MUTE/SETUP Preset 1 Preset 2 gf Adjusting Color of Picture Color adjustment can be made only to video sources (DVD, Navigation system, etc). Color adjustment cannot be made if a Navigation system with the RGB feature is connected. After carrying out steps 1 to 3 of "To display the SETUP screen" (page 29), perform the operation shown below. 1 When the monitor is open, press and hold MUTE/SETUP for at least 2 seconds. The SETUP screen appears. 2 Press preset 1 to activate the DISPLAY setting mode. Press preset 1 again to select COLOR. 3 Press g or f to adjust the color between MIN (-16) and MAX (+16) until you get your desired color. When it reaches the minimum or maximum point, the display shows "MIN" or "MAX" respectively. For any other settings, press preset 1 or another preset button. 4 After setting is completed, press MUTE/SETUP to return to normal mode. NOTE The Color setting for the video sources (AUX/DVD/NAV.) will be individually memorized. Tint adjustment can be made only to video sources (DVD, Navigation system, etc). Tint adjustment cannot be made if a Navigation system with the RGB feature is connected. After carrying out steps 1 to 3 of "To display the SETUP screen" (page 29), perform the operation shown below. 1 When the monitor is open, press and hold MUTE/SETUP for at least 2 seconds. The SETUP screen appears. 2 Press preset 1 to activate the DISPLAY setting mode. Press preset 1 again to select TINT. 3 Press g or f to adjust the Tint (between - 16 and +16). When it reaches the minimum or maximum point, display shows "R MAX" or "G MAX" respectively. For any other settings, press preset 1 or another preset button. 4 After setting is completed, press MUTE/SETUP to return to normal mode. NOTE The TINT setting for the video sources (AUX/DVD/NAV.) will be individually memorized. 30-EN