Alpine 1004 Owners Manual - Page 27
Titling Discs/Stations - features
![]() |
View all Alpine 1004 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Other Useful Features ∗2 If an MP3 file contains ID3 tag information, all the ID3 tag information is displayed (e.g., track name, artist name, or album name). All other tag data is ignored. "NO TAG" will be displayed if an MP3 file contains no ID3 tag information. ∗3 The recording sampling rate and bit rate of the MP3 file are displayed. NOTES • Some characters may not be displayed correctly with this device, depending on the character type. • The CD changer must also be CD Text compatible for the Text information to be displayed. • When the Scroll Setting (refer to page 31) is set to "MANUAL", press and hold TITLE for at least 2 seconds to scroll the Text information, etc., only once. • "NO SUPPORT" is displayed when the desired text information cannot be displayed on this unit. • If the title was not previously input, the monitor display will be blank or the sub-monitor will display Titling Discs/Stations It is possible to title your favorite discs or radio stations. To activate the Title display mode: To title a disc, your vehicle must be parked with the ignition key in the ACC or ON position. To do this, follow the procedure below. 1. Push the foot brake to bring your vehicle to a complete stop at a safe location. Engage the parking brake. 2. Keep pushing the foot brake and release the parking brake once then engage it again. 3. While the parking brake is being engaged the second time, release the foot brake. NOTE For automatic transmission vehicles, place the transmission lever in the Park position. Now, the locking system for the Title display mode has been released. Unless the ignition key is turned OFF, the Title display mode can be activated by engaging only the parking brake. The steps above (1 through 3) are not necessary. Each time the ignition key is turned OFF, the above steps must be repeated. NOTE You cannot title discs/stations while you are driving. If you attempt to drive while titling, the display will show the warning "CAN'T OPERATE WHILE DRIVING" for 5 seconds and then the unit will return to normal mode. 1 When the monitor is open, press TITLE and select the title display mode. For details, see "Displaying the Title/Text" (page 24). 2 Press and hold the TITLE for at least 2 seconds. The first character will blink. 3 Press g or f to select the desired letter/ numeral/symbol available for naming. 4 Press -/J to store the first character. The first character will stop blinking and the display will automatically advance to the next character. When that character begins to blink, you may choose the next letter or symbol of your title. 5 Repeat the steps 3 and 4 above to complete the titling. Pressing -/J after entering the 8th character, automatically stores the title into memory. When entering a title of less than 8 characters (for example, 3 character title): After entering 3 characters to complete your title, the 4th character space will be blinking. Go to step 6 to complete the title. 6 Press TITLE to record the title. NOTES • If you cancel while entering a title, selected characters are not written. • You can enter 24 radio station titles on this unit. If you try to store beyond the limit, the display will show "MEMORY FULL" At this point, no more titles can be stored. • The Changer memory capacity varies depending upon the model being used. • To input a new title, one of the previously inputted titles must first be deleted. • When you want to erase a title, enter a space into all spaces. • The operations described in steps 3 to 5 must be made within 10 seconds. The input mode will be canceled if no action is taken for over 10 seconds. • Removing power from the unit may delete station titles. Use caution when manipulating the power cord. 25-EN
![](/manual_guide/products/alpine-1004-owners-manual-5035cc3/27.png)