Alpine iLX-507 Owners Manual - Page 32

■ Basic EQ 1 Touch [EQ Setting]. 2 Touch [Advanced EQ] or [Basic EQ] to select Equalizer mode. 3 Select a speaker to adjust. Advanced EQ: Front Left / Front Right / Rear Left / Rear Right / Subw. Basic EQ: Front / Rear / Subw. 4 Touch [Band] to select the band to be adjusted. Band1 Band2 ••• Band12 Band13 Band1 • You can select a band directly by touching the screen. 5 Touch [ ] or [ ] of "Frequency" to adjust the frequency of the selected band. Adjustable frequency bands: 20 Hz to 40 kHz (in 1/3 octave steps) Band1: Band2: Band3: Band4: Band5: Band6: Band7: Band8: Band9: Band10: Band11: Band12: Band13: 20 Hz~100 Hz (63 Hz) 63 Hz~315 Hz (125 Hz) 100 Hz~500 Hz (200 Hz) 160 Hz~800 Hz (315 Hz) 250 Hz~1.25 kHz (500 Hz) 315 Hz~1.6 kHz (630 Hz) 500 Hz~2.5 kHz (1 kHz) 1 kHz~5 kHz (2 kHz) 1.6 kHz~8 kHz (3.15 kHz) 2.5 kHz~12.5 kHz (5 kHz) 4 kHz~20 kHz (8 kHz) 6.3 kHz~31.5 kHz (12.5 kHz) 10 kHz~40 kHz (20 kHz) 6 Touch [ ] or [ ] of "Level" to adjust the level of selected band. Setting contents: -9 to +9 (Initial setting: 0) 7 Touch [ ] or [ ] of "Q Factor" to select the bandwidth. Setting contents: Wide (Initial setting) / Medium / Narrow 8 Repeat steps 3 to 7, and adjust all speakers. 9 To store the adjusted setting value, touch and hold [Preset 1], [Preset 2], or [Preset 3] for at least 2 seconds. • Band2 and Band11 are the same as the Bass and Treble controls. For details on setting Bass and Treble, see "Adjusting Bass Level/Treble Level" (page 34). • Settings exceeding the frequency of adjacent bands are not available. • While adjusting the Parametric EQ, you should consider the frequency response of the connected speakers. • When the Parametric EQ is adjusted, the Preset EQ is overridden. • When Preset EQ is set, the linked Parametric EQ settings are also changed. We recommend storing Parametric EQ settings in a Preset in advance. • Touch [Flat] to initialize all values. Calling the Parametric EQ adjusted value Calling the pre-set Parametric EQ adjusted value. Touch [Preset 1], [Preset 2], or [Preset 3] on the Parametric EQ screen. The setting stored in the Preset will be recalled. Equalizer Presets (Preset EQ) 10 typical equalizer settings are preset at the factory for a variety of musical source material. Setting item: Preset EQ Setting contents: FLAT / POP / ROCK / NEWS / JAZZ / ELECTRONIC / HIP HOP / EASY LISTENING / COUNTRY / CLASSICAL • EQ Presets has no initial setting, there is no typical equalizer will be selected in the initial status. • Only one type can be set to On. • When Preset EQ is set, the linked Parametric EQ settings are also changed. We recommend storing Parametric EQ settings in a Preset in advance. 32-EN