Alpine iLX-507 Owners Manual - Page 84
Usable AV/RCA Interface Cable 4-pole mini AV, plug to 3-RCA
![]() |
View all Alpine iLX-507 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Front Output RCA Connectors Can be used as Front Output RCA Connectors. RED is right and WHITE is left. Rear Output RCA Connectors Can be used as Rear Output RCA Connectors. RED is right and WHITE is left. Left Rear (+) Speaker Output Lead (Green) Left Rear (-) Speaker Output Lead (Green/Black) Left Front (+) Speaker Output Lead (White) Left Front (-) Speaker Output Lead (White/Black) Right Front (-) Speaker Output Lead (Gray/Black) Right Front (+) Speaker Output Lead (Gray) Right Rear (-) Speaker Output Lead (Violet/Black) Right Rear (+) Speaker Output Lead (Violet) Remote Turn-On Lead (Blue/White) Connect this lead to the remote turn-on lead of your amplifier or signal processor. Reverse Lead (Violet/White) Parking Brake Lead (Yellow/Blue) Connect this lead to the power supply side of parking brake switch to transmit the parking brake status signals to the unit. Power Antenna Lead (Blue) Connect this lead to the +B terminal of your power antenna, if applicable. * This lead should be used only for controlling the vehicle's power antenna. Do not use this lead to turn on an amplifier or a signal processor, etc. Switched Power Lead (Ignition) (Red) Connect this lead to an open terminal on the vehicle's fuse box or another unused power source that provides (+) 12V only when the ignition is turned on or in the accessory position. Battery Lead (Yellow) Connect this lead to the positive (+) post of the vehicle's battery. Ground Lead (Black) Connect this lead to a good chassis ground on the vehicle. Make sure the connection is made to bare metal and is securely fastened using the sheet metal screw provided. Fuse Holder (15A) USB Connector (2.4A) To USB flash drive, iPhone or Android smartphone. USB Connector (1.5A) To iPhone or Android smartphone (For charging only). REAR CAMERA Input Connector Use when connecting a rear camera. FRONT CAMERA Input Connector Use when connecting a front camera or side camera. iDataLink Interface Connector To iDataLink module (sold separately). LIN Connector Connect this lead to the LIN connector of the Dash Cam. Drive Recorder Input Connector Input lead for Dash Cam video signal. Speed Sensor Lead (Green/White) Improper connection of the speed pulse line may cause important safety features of the vehicle to fail (such as the brakes or air bags). Such failures may result in an accident and loss of life. We strongly recommend that the installation be performed by a trained, authorized Alpine dealer. Usable AV/RCA Interface Cable (4-pole mini AV plug to 3-RCA) Wiring convention of this system is as follows; Audio L (White) Audio R (Red) Ground Video (Yellow) (Yellow) (Red) (White) Video input terminal Audio input terminal (R, L) • Configuration commercially available 4-pole mini AV plugs is not standardized. 84-EN
![](/manual_guide/products/alpine-ilx507-owners-manual-65fd521/84.png)