Alpine iLX-507 Owners Manual - Page 63
Adjusting the Caution Display Location, Hitch Guide Display ON/OFF Setting, About the Rear Camera
View all Alpine iLX-507 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Adjusting the Caution Display Location 1 Touch the screen when the image from the camera is displayed. The operation screen is displayed on the screen. • After a 5-second time-out, the operation screen returns to the camera display screen. 2 Touch [Caution]. • For each touch, the caution location moves to the top or bottom of the screen. Hitch Guide Display ON/OFF Setting 1 Touch the screen when the image from the camera is displayed. The operation screen is displayed on the screen. • After a 5-second time-out, the operation screen returns to the camera display screen. 2 Touch [Hitch] on the Rear camera display screen. The hitch guide appears, and then the [Hitch] switch changes to [Hitch]. Hitch Guide 3 Touch [Hitch] to turn off the guide. About the Rear Camera Guide To display the guide, set "Guide Display ON/OFF Setting" (page 62) to On. Also, to adjust the guide, see Camera Guide Setup" (page 26). ■ Indication mark meaning When the car is put into reverse gear, the monitor switches to the rear view camera image. Guides appear to help visualize the car's width and distance from the rear bumper. Car width extension lines (red, yellow and green in order of distance) If properly calibrated, the marks indicate the car's width. This helps guide the car's path when backing up in a straight line. The marks represent the distance from the rear of the car (from the rear end of the bumper). • The marks do not move in synchronization with the steering wheel. • Set the marks to suit the car's width. Distance guidance lines The marks represent the distance from the rear of the car (from the rear end of the bumper). • The marks do not move in synchronization with the steering wheel. • We recommend that you measure the actual distance to the marks when parked on a level surface. • Depending on the condition of the car or road surface, the range of vision may vary. • The camera has a limited range of vision. Objects at extreme angles to the camera (e.g. under the bumper or at opposite ends of the bumper) may not be in the its field-of-vision. • The rear camera image may have a tint which is different from the actual surroundings. • Depending on the car, the guidance may deviate to the right or left. This is not a malfunction. 63-EN