Apple MC408LL Apple Technician Guide - Page 110
Reassembly
![]() |
UPC - 885909370924
View all Apple MC408LL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Removal 1 Remove the T6 screw shown: • 922-9580 2 Lift the cowling up slightly to clear other hardware and pull straight out, rotating slightly clockwise, to disengage it. Inserting the pointed end of a black stick into the top screw hole may help to pull out the cowling. Be careful not to catch on components underneath. Note: The left side of the cowling clips onto a clip screw on the heatsink inside the housing. Reassembly Important: Make sure that the Ambient sensor cable does not go over the top of the drives flex cable connectors, as the cowling helps to hold them in place. Important: Do not overtighten screws. Install all screws by hand. Do not use power tools. 2010-08-03 Mac mini (Mid 2010) Take Apart - Cowling 110
![](/manual_guide/products/apple-mc408ll-apple-technician-guide-9b0f311/110.png)
Mac mini (Mid 2010) Take Apart — Cowling
110
2010-08-03
Removal
1
Remove the T6 screw
shown:
•
922-9580
2
Lift the cowling up
slightly to clear other
hardware and pull
straight out, rotating
slightly clockwise, to
disengage it.
Inserting the pointed
end of a black stick
into the top screw
hole may help to pull
out the cowling.
Be careful not to
catch on components
underneath.
Note:
The left side of
the cowling clips onto
a clip screw on the
heatsink inside the
housing.
Reassembly
Important:
Make sure
that the Ambient sensor
cable does not go over
the top of the drives flex
cable connectors, as the
cowling helps to hold
them in place.
Important:
Do not overtighten screws. Install all screws by hand. Do not use power tools.