Apple MC408LL Apple Technician Guide - Page 20
card, Hard Drive, Optical Drive, Disconnect AirPort/Bluetooth
![]() |
UPC - 885909370924
View all Apple MC408LL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
6. Disconnect power button Yes Replace Power Button X03 connector from logic board and assembly short the two power button connector pins on logic board. No Go to step 7 Verify if the unit powers on. 7. Disconnect AirPort/Bluetooth card, Hard Drive, Optical Drive and LED/IR Sensor cables from logic board. Connect AC cable and press the power button to verify if a startup error tone is heard. Yes Reconnect one by one each X03 device and retest to identify the shorting one. When found, replace affected device cable first, and retest. No Go to step 8 8. Disconnect the power supply cable from logic board , connect AC cable and use a multimeter to verify that a 12 Volts voltage is present between the two outer pins of cable. See KBase article http://support.apple.com/kb/ HT3250 for details on using a digital multi-meter Yes Power supply is present. M01 Replace logic board and retest. No Replace cable between power X03 supply and logic board and retest. If issue persists after cable P01 was replaced, replace power supply and retest. 2010-08-03 Mac mini (Mid 2010) Symptom Charts - Startup and Power 20
![](/manual_guide/products/apple-mc408ll-apple-technician-guide-9b0f311/20.png)