Apple MC408LL Apple Technician Guide - Page 61
Go to step 4, Connect known good optical
![]() |
UPC - 885909370924
View all Apple MC408LL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Deep Dive Check 1. Verify if media is free to spin without optical drive scraping edge or surface of media? Result Yes No Action Go to step 2 Check drive correct geometry while installed. Replace optical drive Code J05 2. Test both CD and DVD media. Can drive read both CD media and DVD media? Yes Go to step 6 No Drive has a laser issue if only J03 one media is read. Replace the optical drive. If both types media fail, go to step 3 3. Remove bottom cover, Yes Go to step 6 disconnect AirPort antenna and remove shield, disconnect and No Go to step 4 remove fan and cowling, then check the optical drive flex cable on logic board. Visually inspect connectors for any debris, damage or bent pins. If no damage, reseat optical drive flex cable on logic board, reinsert logic board and verify that both types of media read reliably now. 4. Connect known good optical Yes Logic board not in cause. Go drive and cable to logic board. to step 5 Do both types of media reliably read now? No Issue also happens with M19 known-good optical drive and cable: Suspect Logic board. Replace logic board. 5. Connect known-good optical drive with original cable. Do both types of media reliably read now? Yes Cable not in cause, replace J03 user's defective optical drive. No Replace optical drive cable an X03 reinstall user's optical drive. 2010-08-03 Mac mini (Mid 2010) Symptom Charts - Mass Storage 61
![](/manual_guide/products/apple-mc408ll-apple-technician-guide-9b0f311/61.png)