Brother International BES-116 Instruction Manual - English - Page 117

Area Check, 4-1 External Tracing, 4-2 Automatic Hoop Movement in Area

Get Brother International BES-116 PDF manuals and user guides View all Brother International BES-116 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 117 highlights

4. Area Check 4-1 External Tracing Chapter 6 Operation of Machine • If the check switch is pressed in other cases than "area over", the rectangular outline of the pattern is traced. Embroidering start position Note) The outline of pattern can be checked in rectangle or octagon by setting "Checking embroidery area" in "Enviromment 1". 4-2 Automatic Hoop Movement in Area 0.1mm (Example) 0.1mm Embroidering area • If "area over" is displayed, press the check switch. The hoop automatically moves inside the embroidering area, where the pattern is set, at the nearest position. Note) After finishing the movement inside the area by this function, execute external tracing. Then, check that the needle and the presser foot do not interfere with the hoop before starting embroidering. Embroidering area If the pattern is not held in the embroidering area as shown below, the hoop cannot move into the area. Enlarge the embroidering area on the operation panel. BES-116AC 115

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
Chapter 6
Operation of Machine
BES-116AC
115
•
If "area over" is displayed, press the check
switch.
The hoop automatically moves
inside the embroidering area, where the
pattern is set, at the nearest position.
0.1mm
0.1mm
Embroidering area
(Example)
Embroidering
start position
4. Area Check
4-1 External Tracing
•
If the check switch is pressed in other
cases than "area over", the rectangular
outline of the pattern is traced.
Note)
The outline of pattern can be checked in rect-
angle or octagon by setting "Checking em-
broidery area" in "Enviromment 1".
4-2 Automatic Hoop Movement in Area
Note)
After finishing the movement inside the area by this function, execute external tracing.
Then, check that
the needle and the presser foot do not interfere with the hoop before starting embroidering.
Embroidering area
If the pattern is not held in the embroidering area as shown below, the hoop cannot move into the area.
Enlarge the embroidering area on the operation panel.