Brother International BES-116 Instruction Manual - English - Page 87
Thread Withdrawal Feed Length, Select a needle bar to modify by pressing
View all Brother International BES-116 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
2. Select by pressing . Chapter 5 Setting 3. Press . 4. Select a needle bar to modify by pressing . Press for setting the same speed range for all needle bars. 5. Input thread length by pressing ten keys. Thread length can be input within the range of 1 ~ 6. Length decreases as the figure decreases. 6. After setting is finished with all needle bars, press END . Modified setting is saved and the previous screen is displayed again. Thread Withdrawal Feed Length Thread withdrawal length can be set before thread trimming. The input range is 0 ~ 100mm. This function is previously set to 15mm upon shipments. 1. Press . 2. Select by pressing . BES-116AC 85
BES-116AC
85
Chapter 5 Setting
2.
Select
by pressing
.
3.
Press
.
4.
Select a needle bar to modify by pressing
.
Press
for setting the same speed range for all needle bars.
5.
Input thread length by pressing ten keys.
Thread length can be input within the range of 1 ~ 6.
Length decreases as the figure decreases.
6.
After setting is finished with all needle bars, press
END
.
Modified setting is saved and the previous screen is displayed again.
Thread Withdrawal Feed Length
Thread withdrawal length can be set before thread trimming.
The input range is 0 ~ 100mm.
This function is previously set to 15mm upon shipments.
1.
Press
.
2.
Select
by pressing
.