Brother International BES-116 Instruction Manual - English - Page 36
For adjusting the tension spring force, insert a driver tip in the groove of the thread tension
View all Brother International BES-116 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Chapter 1 Preparation of Embroidery Machine 2. For adjusting the height, loosen the screw q and turn the upper thread tension assembly. 3. For adjusting the tension spring force, insert a driver tip in the groove of the thread tension bar w and turn it. Lower thread tension The standard tension of the lower thread is 0.2~ 0.3N. This tension may vary depending on the used thread. In general, press the bobbin case to a smooth vertical surface and hang the designated number of coins. Turn the thread tension screw so that the lower thread will come out smoothly. To tighten To loosen 34 BES-116AC
Chapter 1
Preparation of Embroidery Machine
BES-116AC
34
To loosen
To tighten
2.
For adjusting the height, loosen the screw
q
and turn the upper thread tension assembly.
3.
For adjusting the tension spring force, insert a driver tip in the groove of the thread tension
bar
w
and turn it.
Lower thread tension
The standard tension of the lower thread is 0.2~
0.3N.
This tension may vary depending on the used
thread.
In general, press the bobbin case to a
smooth vertical surface and hang the
designated number of coins.
Turn the thread
tension screw so that the lower thread will come
out smoothly.