Brother International BES-116 Instruction Manual - English - Page 119
Inching Mode during Embroidering (Forcible Hoop Movement)
View all Brother International BES-116 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Chapter 6 Operation of Machine 5-2 Inching Mode during Embroidering (Forcible Hoop Movement) Note) • Moving the frame greatly in the inching mode may cause an interference with the machine. Pay utmost care in the inching mode. • Although the distance of the frame moved in the inching mode is stored even after turning OFF the power, if the power is turned ON again and sewing is started, the pattern may be embroidered in a different position. Be sure to use the inching mode appropriately. 1. Press the while pressing the STOP switch in order to select the inching mode. 2. Press the jog switch and the hoop moves to the direction of the pressed switch. Note) • Note that the forcible hoop movement will produce deviation of embroidering by the amount. • If the hoop and material are deviated from each other during embroidering, correct it by using the jog switches. 3. Pressing the "END" switch resets the inching mode. END 4. Press the "START" switch restarts embroidering. BES-116AC 117