Brother International HL-1870n Network Users Manual - English - Page 103

Installation on Other Host Computers

Get Brother International HL-1870n PDF manuals and user guides View all Brother International HL-1870n manuals
Add to My Manuals
Save this manual to your list of manuals

Page 103 highlights

CHAPTER 9 LAT NETWORK CONFIGURATION 6. You now need to establish a host-initiated connection. For example: lcp -h tty05:BRN_310107:P1 7. Make the spool directory as shown in the following example: cd /usr/spool mkdir lp1 chown daemon lp1 Again substitute your actual printer name for "lp1". 8. Print a file to verify the connection. For example, the following command prints the printcap file: lpr -Plp1 /etc/printcap "lp1" in this example must be replaced by your actual printer name. You may find that you get an error message "Socket is already connected". If this happens, simply try printing again and the message should go away and the job should be printed. If you get any other message, double check your configuration. If you have trouble printing, enter the lpstat -t command to get the status of the print job. If the job is hung in the queue, you may have a configuration problem: Refer to the Troubleshooting portion of this userguide for further assistance. Installation on Other Host Computers Installation procedures differ somewhat for other DEC operating systems (e.g., RSTS/E and RSX-11M-PLUS). Refer to the appropriate DEC documentation for information on setting up LAT print queues on these systems. 9-9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
CHAPTER 9 LAT NETWORK CONFIGURATION
9-9
6.
You now need to establish a host-initiated connection. For example:
lcp -h tty05:BRN_310107:P1
7.
Make the spool directory as shown in the following example:
cd /usr/spool
mkdir lp1
chown daemon lp1
Again substitute your actual printer name for "lp1".
8.
Print a file to verify the connection. For example, the following
command prints the printcap file:
lpr -Plp1 /etc/printcap
"lp1" in this example must be replaced by your actual printer name. You
may find that you get an error message "Socket is already connected". If
this happens, simply try printing again and the message should go away
and the job should be printed. If you get any other message, double
check your configuration.
If you have trouble printing, enter the lpstat -t command to get the status
of the print job. If the job is hung in the queue, you may have a
configuration problem: Refer to the
Troubleshooting portion
of this
userguide for further assistance.
Installation on Other Host Computers
Installation procedures differ somewhat for other DEC operating systems (e.g.,
RSTS/E and RSX-11M-PLUS). Refer to the appropriate DEC documentation for
information on setting up LAT print queues on these systems.