Brother International HL-1870n Network Users Manual - English - Page 47
Changing the workgroup/domain name using TELNET or BRCONFIG or a web browser
View all Brother International HL-1870n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
CHAPTER 4 NETBIOS PEER-TO-PEER PRINTING Changing the workgroup/domain name using TELNET or BRCONFIG or a web browser If you are unable to use the BRAdmin application, you can use TELNET, a web browser or the BRCONFIG Remote console program (BRCONFIG requires the IPX/SPX protocol to be installed on your PC). When you are connected to the print server, enter the default password "access" in response to the "#" prompt. Type in anything in response to the "Enter Username>" prompt, you will then be at the "Local>" prompt. Now enter the command: SET NETBIOS DOMAIN domainname EXIT Where domainname is the name of the domain or workgroup that you are on. If you are not sure what your domain name or workgroup name is look in the Identification tab in your Windows 95/98/Me/NT 4.0 network applet. You can also use a standard WWW browser to change the NetBIOS name, to do this connect to the print server using its IP address and then select the "Configure NetBIOS" option from the Network Configuration screen, enter you workgroup/domain name into the "Domain Name" text box. Make sure you submit the changes. NetBIOS Port Monitor for Windows 95/98/Me, NT4.0/2000/XP This software requires the TCP/IP transport protocols to be installed on your Windows 95/98/Me, NT4.0/2000/XP computer. To install those protocols refer to your Windows documentation. If you are using the TCP/IP protocol, the proper IP address should be defined on both the Brother print server and your client PC. 4-3