Brother International HL-1870n Network Users Manual - English - Page 145
Reloading process, TURN OFF THE PRINTER DURING THESE PROCESSES.
View all Brother International HL-1870n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
APPENDIX Reloading process The Data LED on the printer control panel will blink during the firmware file loading process. During programming process, the Backlit of LCD goes off, and "Erase xxxxxx" and "Write xxxxxx" wll be indicated alternately. After the firmware update is completed, the printer will re-start automatically. DO NOT TURN OFF THE PRINTER DURING THESE PROCESSES. If the Data LED does not stop blinking after about two minutes, check to make sure that you correctly entered all parameters and that your network connections are good. Then power the print server/printer off and then on again, to retry the download. If you encounter problems upgrading the firmware and you find that the network portion of the printer no longer functions, you should try re-programming the print server by using the COPY command from the DOS prompt of your PC. To do this, connect a parallel cable between your PC and printer and use the command "COPY filename LPT1:/B" (where filename is the new firmware file). A-6