Brother International HL-1870n Network Users Manual - English - Page 114

Using BRAdmin and the IPX/SPX Protocol to set the IP address

Get Brother International HL-1870n PDF manuals and user guides View all Brother International HL-1870n manuals
Add to My Manuals
Save this manual to your list of manuals

Page 114 highlights

CHAPTER 12 TCP/IP CONFIGURATION Using BRAdmin and the IPX/SPX Protocol to set the IP address If your PC has Novell Netware Client software and is using the IPX/SPX protocol, do the following: 1. Select IPX/SPX filter in the left frame of the main window. 2. Check the print server name (the default node name will be BRN_xxxxxx, where "xxxxxx" is the last six digits of the Ethernet address (MAC address)) . If you cannot find your server name, select the "Device" menu and choose "Search Active Devices" (you can also press the F4 key) and try again. You can find the node name and MAC address by printing out the printer configuration page. Refer to the User's Guide for information on how to print the configuration page on your print server. 3. Select the print server that you wish to configure and double click it. You will be asked for a password. The default password is "access". 4. Select the TCP/IP tab and set the IP address, Subnet mask and Gateway as needed. 5. Click OK. 12-3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
CHAPTER 12 TCP/IP CONFIGURATION
12-3
Using BRAdmin and the IPX/SPX
Protocol
to set the IP address
If your PC has Novell Netware Client software and is using the IPX/SPX
protocol, do the following:
1.
Select IPX/SPX filter in the left frame of the main window.
2.
Check the print server name (the default node name will be
BRN_xxxxxx, where "xxxxxx" is the last six digits of the Ethernet
address (MAC address)) .
If you cannot find your server name, select the "Device" menu and choose
"Search Active Devices" (you can also press the F4 key) and try again.
You can find the node name and MAC address by printing out the printer
configuration page. Refer to the User
’
s Guide for information on how to print the
configuration page on your print server.
3.
Select the print server that you wish to configure and double click it.
You will be asked for a password. The default password is "access".
4.
Select the TCP/IP tab and set the IP address, Subnet mask and Gateway
as needed.
5.
Click OK.