Brother International HL-6050DN Users Manual - English

Brother International HL-6050DN - B/W Laser Printer Manual

Get Brother International HL-6050DN - B/W Laser Printer PDF manuals and user guides
UPC - 012502609568
View all Brother International HL-6050DN manuals
Add to My Manuals
Save this manual to your list of manuals

Brother International HL-6050DN manual content summary:

  • Brother International HL-6050DN | Users Manual - English - Page 1
    Brother Laser Printer HL-6050 HL-6050D HL-6050DN User's Guide For visually-impaired users You can read this manual with Screen Reader 'text-to-speech' software. You must set up the hardware and install the driver before you can use the printer. Please use the Quick Setup Guide to set up the printer.
  • Brother International HL-6050DN | Users Manual - English - Page 2
    of warnings, cautions, and notes We use the following terms throughout this User's Guide: You must follow these warnings to prevent possible personal injury. You must follow these instructions to make sure you use the printer properly and do not damage it. Remember these useful tips when you use
  • Brother International HL-6050DN | Users Manual - English - Page 3
    fuser unit is marked with a caution label. Please do NOT remove or damage the label. There are high voltage electrodes inside the printer. Before you clean the printer, of the printer. ■ Do not use cleaning materials that contain ammonia. They will damage the printer and the toner cartridge. ii
  • Brother International HL-6050DN | Users Manual - English - Page 4
    User's Guide are registered trademarks of their respective companies. Compilation and Publication Notice Under the supervision of Brother Industries Ltd., this manual ©2003 Brother Industries Ltd. Shipment of the Printer If for any reason you must ship your Printer, carefully package the Printer to
  • Brother International HL-6050DN | Users Manual - English - Page 5
    HL-6050D and HL-6050DN only) ...1-39 Guidelines for printing on both sides of the paper 1-40 Carbon copy printing ...1-42 2 Driver and software ...2-1 Printer driver ...2-1 For Windows® ...2-2 Features in the PCL printer driver 2-2 Features in the BR-Script printer driver (PS printer driver 2-10
  • Brother International HL-6050DN | Users Manual - English - Page 6
    accessories and supplies 4-1 Lower tray unit (LT-6000) ...4-2 Network board (NC-6100h) (For HL-6050 and HL-6050D 4-3 Installing the network board 4-3 Wireless print server (NC-7100w 4-6 Installing the network board 4-6 CompactFlash® card ...4-9 Inserting the CompactFlash® card 4-10 DIMM
  • Brother International HL-6050DN | Users Manual - English - Page 7
    cartridge ...5-2 TONER LOW Message ...5-2 TONER LIFE END message 5-2 Replacing the toner cartridge 5-3 Drum unit ...5-8 CHANGE DRUM SOON message 5-8 Replacing the drum unit ...5-8 Replacing Maintenance Parts ...5-13 Maintenance Messages 5-13 Cleaning ...5-14 Cleaning the outside of the printer
  • Brother International HL-6050DN | Users Manual - English - Page 8
    For Canada C-4 Laser Notice ...C-4 Laser Safety (100 to 120 volt model only C-4 FDA Regulations (100 to 120 volt model only C-4 Internal laser radiation ...C-4 IMPORTANT - For Your Safety ...C-5 Disconnect device ...C-5 Caution for LAN connection (For model HL-6050DN only C-5 10 Index ...I-1 vii
  • Brother International HL-6050DN | Users Manual - English - Page 9
    , check to see that you have all of the following parts. 1 2 1 Printer 2 Drum unit assembly (with toner cartridge included) 3 Quick setup guide 4 CD-ROM 5 AC power cord Components may differ from one country to another. 3 4 5 Figure 1-1 The power cord may be slightly different than the one
  • Brother International HL-6050DN | Users Manual - English - Page 10
    Front view Front view 1 8 2 7 3 6 4 5 Figure 1-2 1 Face down output tray support flap (support flap) 2 Control panel 3 Multi-purpose tray (MP tray) 4 MP tray support flap 5 Paper tray 6 Front cover release button 7 Front cover 8 Face down output tray (top output tray) ABOUT THIS PRINTER 1 - 2
  • Brother International HL-6050DN | Users Manual - English - Page 11
    output tray support 3 AC power connector 4 Power switch 5 Parallel interface connector 6 USB interface connector 7 Side cover 8 (HL-6050DN) 10/100BASE-TX port 9 (HL-6050DN) network LED (light-emitting diode) 10 (HL-6050DN) network test button 11 CompactFlash® card slot * The printer illustration is
  • Brother International HL-6050DN | Users Manual - English - Page 12
    .) between the ventilation hole and the wall. ■ Do not put the printer in direct sunlight. If you have to put it near a window, use a blind or a heavy curtain to protect the printer from direct sunlight. ■ Do not put the printer near devices that contain magnets or generate magnetic fields. ■ Do not
  • Brother International HL-6050DN | Users Manual - English - Page 13
    printer loads paper from the installed paper tray, manual feed tray (multi-purpose tray) or optional lower tray unit. The names for the paper trays in the printer driver and this guide lb) L Up to 10 sheets A4 or Letter MP tray L L L 60 g/m2 to 161 g/m2 (16 to 43 lb) L L Up to 10 sheets A4 or Letter
  • Brother International HL-6050DN | Users Manual - English - Page 14
    source in the PAPER menu. See PAPER on page 3-15. We recommend that you use face up printing when you print on transparencies. ABOUT THIS PRINTER 1 - 6
  • Brother International HL-6050DN | Users Manual - English - Page 15
    Xerox Recycled Supreme 80 g/m2 3M CG3300 Avery laser label L7163 USA Xerox 4200DP 20 lb 3M CG 3300 Avery laser label #5160 ■ Before you buy a lot to the Basic tab of the printer driver, in the Media Type option select Envelopes. And then, at the back of the printer, open the back output tray and
  • Brother International HL-6050DN | Users Manual - English - Page 16
    Printable area When using PCL (standard driver) emulation, the edges of the paper that cannot be printed on are shown below. Portrait 1 2 4 3 Figure 1-5 A4 1 4.2 mm (0.17 in.) 2 6.01 emulation, the edges of the paper that cannot be printed on are 4.32 mm (0.17 in.). ABOUT THIS PRINTER 1 - 8
  • Brother International HL-6050DN | Users Manual - English - Page 17
    .) 5.0 mm (0.19 in.) When using BR-Script emulation, the edges of the paper that cannot be printed on are 4.32 mm (0.17 in.). 1 - 9 ABOUT THIS PRINTER
  • Brother International HL-6050DN | Users Manual - English - Page 18
    can I use? on page 1-5. Printing on plain paper from the paper tray 1 Select the Paper Size, Media Type, Paper Source, and other settings in the printer driver. Media Type: Plain Paper Paper Source: Tray 1 (or Tray 2) PCL (standard) printer driver BR-Script printer driver ABOUT THIS PRINTER 1 - 10
  • Brother International HL-6050DN | Users Manual - English - Page 19
    2 Pull the paper tray completely out of the printer. Figure 1-7 3 While pressing the blue paper-guide release lever, slide the paper guides to fit the paper size. Check that the guides are firmly in the slots. Figure 1-8 4 To avoid paper jams and misfeeds, fill up the paper tray with small stacks
  • Brother International HL-6050DN | Users Manual - English - Page 20
    paper tray at any one time, or it may cause a jam. Check that paper is below the maximum paper height guide (▼). Figure 1-10 5 Put the paper tray firmly back in the printer. Check that it is inserted fully into the printer. 6 Send the print data to the printer. Figure 1-11 Figure 1-12 ABOUT THIS
  • Brother International HL-6050DN | Users Manual - English - Page 21
    plain paper from the multi-purpose tray (MP tray) The printer automatically turns on the MP Tray mode when you put paper in the multi-purpose tray. 1 Select the Paper Size, Media Type, Paper Source, and other settings in the printer driver. Media Type: Plain Paper Paper Source: MP Tray PCL (standard
  • Brother International HL-6050DN | Users Manual - English - Page 22
    the MP tray and lower it gently. 3 Pull out the MP tray support flap. Figure 1-13 Figure 1-14 4 Put paper in the MP tray . Make sure the paper touches the back of the tray and remains under the maximum paper height guides on both sides of the tray. Do not put more than 100 sheets of paper (80 g/
  • Brother International HL-6050DN | Users Manual - English - Page 23
    printing, the inside tray rises to feed paper into the printer. ■ Put the leading edge (top of the paper) in first and push it gently into the tray. ■ The top of the paper stack must be under the maximum paper height guides that are on both sides of the tray. 6 Send the
  • Brother International HL-6050DN | Users Manual - English - Page 24
    you use paper that is made for laser printers. ■ Use paper that can withstand intense heat; the interior of the printer reaches very high temperatures while printing. Figure you must choose the same paper size from your software application as the paper in the tray. ■ See What kind of paper can I
  • Brother International HL-6050DN | Users Manual - English - Page 25
    want to use, see What kind of paper can I use? on page 1-5. 1 Select the Paper Size, Media Type, Paper Source, and other settings in the printer driver. Media Type: Thick Paper or Thicker Paper Paper Source: MP Tray PCL (standard
  • Brother International HL-6050DN | Users Manual - English - Page 26
    2 Open the back output tray, and then pull out the face up output tray support if necessary. Figure 1-20 3 Open the MP tray and lower it gently. 4 Pull out the MP tray support flap. Figure 1-21 Figure 1-22 ABOUT THIS PRINTER 1 - 18
  • Brother International HL-6050DN | Users Manual - English - Page 27
    ) in first and push it gently into the tray. ■ The top of the paper stack must be under the maximum paper height guides that are on both sides of the tray. 7 Send the print data to the printer. 8 After you finish the print job, close the back output tray. 1 - 19 ABOUT THIS
  • Brother International HL-6050DN | Users Manual - English - Page 28
    Caution Remove each sheet immediately after printing. Stacking the sheets may cause a paper jam or the paper to curl. Figure 1-25 ABOUT THIS PRINTER 1 - 20
  • Brother International HL-6050DN | Users Manual - English - Page 29
    previously printed on by a laser printer ■ are pre-printed on windows, holes, cutouts or perforations Figure 1-26 IF YOU USE ANY OF THE TYPES OF ENVELOPES LISTED ABOVE, THEY MAY DAMAGE YOUR PRINTER. THIS DAMAGE IS NOT COVERED UNDER ANY BROTHER WARRANTY OR SERVICE software application as the paper in the
  • Brother International HL-6050DN | Users Manual - English - Page 30
    Most envelopes will be suitable for your printer. However, some envelopes will have feed and print quality problems due to the way they have the envelopes in a laser printer. Before you print many envelopes, test one to make sure that the print results are what you want. Brother will not recommend a
  • Brother International HL-6050DN | Users Manual - English - Page 31
    printer automatically turns on the MP Tray mode when you put paper in the MP tray. 1 Select the Paper Size, Media Type, Paper Source, and other settings in the printer driver. Media Type: Envelopes Paper Source: MP Tray PCL (standard) printer driver BR-Script printer driver 1 - 23 ABOUT THIS PRINTER
  • Brother International HL-6050DN | Users Manual - English - Page 32
    2 Open the back output tray, and then pull out the face up output tray support if necessary. Figure 1-28 3 Open the MP tray and lower it gently. 4 Pull out the MP tray support flap. Figure 1-29 Figure 1-30 ABOUT THIS PRINTER 1 - 24
  • Brother International HL-6050DN | Users Manual - English - Page 33
    At the back of the printer, open the back output have finished printing your envelopes, close the back output tray to reset the two blue tabs back to their original position. Figure 1- the back of the tray and remain under the maximum paper height guides on both sides of the tray. Put the side to be
  • Brother International HL-6050DN | Users Manual - English - Page 34
    the following; ■ During printing, the inside tray rises to feed envelopes into the printer. ■ The side to be printed on must be face up. ■ Put the must be under the maximum paper height guides that are on both sides of the tray. 7 Send the print data to the printer. 8 After you finish the print job
  • Brother International HL-6050DN | Users Manual - English - Page 35
    ■ If envelopes get smudged during printing, in the printer driver select MP Tray as the Paper Source for a straight paper path. Then, set the Media Type to Thick by the manufacturer should be secure. ■ All sides should be properly folded without any wrinkles or creases. 1 - 27 ABOUT THIS PRINTER
  • Brother International HL-6050DN | Users Manual - English - Page 36
    tray Do not put more than 10 transparencies in the paper tray. 1 Select the Paper Size, Media Type, Paper Source, and other settings in the printer driver. Media Type: Transparencies Paper Source: Tray 1 (or Tray 2) PCL (standard) printer driver BR-Script printer driver ABOUT THIS PRINTER 1 - 28
  • Brother International HL-6050DN | Users Manual - English - Page 37
    2 Pull the paper tray completely out of the printer. Figure 1-34 3 While pressing the blue paper guide release levers, slide the paper guides to fit the transparency size. Check that the guides are firmly in the slots. Figure 1-35 4 Put transparencies in the tray. Put the side that is going to be
  • Brother International HL-6050DN | Users Manual - English - Page 38
    Do not put more than 10 transparencies in the tray at any one time, or it may cause a jam. Check that transparencies are below the maximum paper mark (▼). Figure 1-37 5 Put the paper tray firmly back in the printer. Check that it is inserted fully into the printer. 6 Send the print data to the
  • Brother International HL-6050DN | Users Manual - English - Page 39
    path from the MP tray through to the back of the printer. The printer automatically turns on the MP Tray mode when you put paper in the MP tray. 1 Select the Paper Size, Media Type, Paper Source, and other settings in the printer driver. Media Type: Transparencies Paper Source: MP Tray PCL (standard
  • Brother International HL-6050DN | Users Manual - English - Page 40
    2 Open the back output tray, and then pull out the face up output tray support if necessary. Figure 1-40 3 Open the MP tray and lower it gently. 4 Pull out the MP tray support flap. Figure 1-41 Figure 1-42 ABOUT THIS PRINTER 1 - 32
  • Brother International HL-6050DN | Users Manual - English - Page 41
    under the maximum paper height guides on both sides of the tray. Do not put more than 10 transparencies in the MP tray or a jam. 6 While pressing the paper guide release lever, slide the paper guide to fit the transparency size. Figure 1-44 guides that are on both sides of the tray. 1 - 33 ABOUT THIS
  • Brother International HL-6050DN | Users Manual - English - Page 42
    7 Send the print data to the printer. 8 After you finish printing, close the back output tray. Caution Remove each transparency immediately after printing. Stacking the printed transparencies may cause a paper jam or the transparency to curl. ABOUT THIS PRINTER 1 - 34
  • Brother International HL-6050DN | Users Manual - English - Page 43
    95/98/Me, Windows NT® 4.0, Windows® 2000/XP, Mac OS® 8.6 to 9.2 and Mac OS® X 10.1/10.2 all enable duplex printing. For more information about how to choose the settings, see the Help text in the printer driver. The BR-Script 3 printer driver (PostScript® 3™ Emulation) does not support manual duplex
  • Brother International HL-6050DN | Users Manual - English - Page 44
    the Properties dialog box in the printer driver. Choose the General tab and click the Printing Preferences icon. Choose the Manual Duplex printing mode from the Advanced will be printed on (the blank side) face up. Follow the instructions on the computer screen. Figure 1-47 4 Repeat Step 3 until you
  • Brother International HL-6050DN | Users Manual - English - Page 45
    Automatic duplex printing (available for HL-6050D and HL-6050DN only) The screens in this section are from Windows® XP. The screens on your PC tray. 2 Set the paper adjustment lever for duplex printing at the back of the printer to match your paper size. Letter or Legal size A4 size Figure 1-49 If
  • Brother International HL-6050DN | Users Manual - English - Page 46
    in the Advanced tab, make sure that Use Duplex Unit has been selected, and then click the OK button. The printer will print on both sides of the paper automatically. For the BR-Script printer driver Open the Properties dialog box in the printer driver. Choose the General tab and click the Printing
  • Brother International HL-6050DN | Users Manual - English - Page 47
    Booklet printing (for the PCL printer driver) (available for HL-6050D and HL-6050DN only) 1 Put paper in the paper will be out of position on the paper. 3 Open the Properties dialog box in the printer driver. Choose the General tab and click the Printing Preferences icon. After you click the Duplex
  • Brother International HL-6050DN | Users Manual - English - Page 48
    may be curled. Remove the paper and straighten it. ■ (For manual duplex printing) When you put paper in the paper tray, first the paper to be printed. At the back of the printer, open the back output tray and push down the two reset the two blue tabs back to their original position. Figure 1-51
  • Brother International HL-6050DN | Users Manual - English - Page 49
    Paper orientation for printing on both sides of the paper (for automatic duplex printing) The printer prints the second page first. If you print 10 pages on 5 sheets of paper, it will print page 2 then page 1 on the first second side, put the heading face up and in first. 1 - 41 ABOUT THIS PRINTER
  • Brother International HL-6050DN | Users Manual - English - Page 50
    can make copies as though you are printing on carbon paper using a dot matrix printer. For example, you can print 'Data A' to 'Sheet 1' which is blue Tray 1 and paper for 'Sheet 2' in the MP tray, the printer will automatically feed paper for 'Sheet 1' from the Tray 1 and 'Sheet 2' from
  • Brother International HL-6050DN | Users Manual - English - Page 51
    , see the Network User's Guide on the CD-ROM. For Linux ■ GDI printer driver ■ BR-Script (PostScript® 3TM language emulation) printer driver (PS printer driver) Operating system PCL driver Windows® 95/98/Me Windows® 2000/XP L Windows NT® 4.0 Mac OS® 8.6 to 9.2 Mac OS® X 10.1/10.2 Linux
  • Brother International HL-6050DN | Users Manual - English - Page 52
    Windows® 2000 or XP, you can access the Basic tab by clicking Printing Preferences... in the General tab of the Brother HL-6050D/DN series Properties screen. 1 2 1 Select the Paper Size, Multiple Page, Orientation and other settings. 2 Select the Paper Source and other settings. DRIVER AND SOFTWARE
  • Brother International HL-6050DN | Users Manual - English - Page 53
    Advanced tab If you are using Windows NT® 4.0, Windows® 2000 or XP, you can access the Advanced tab by clicking Printing Preferences... in the General tab of the Brother HL-6050D/DN series Properties screen. 1 234 5 Change the tab settings by clicking the following icons: 1 Print Quality 2 Duplex 3
  • Brother International HL-6050DN | Users Manual - English - Page 54
    Toner Save Mode, which reduces the print density. Print Setting You can manually change the brightness, contrast and other settings. ■ Improve gray printing (For Windows NT® 4.0, Windows® 2000/XP users only the print image scaling and select Mirror / Reverse print options. DRIVER AND SOFTWARE 2 - 4
  • Brother International HL-6050DN | Users Manual - English - Page 55
    in this tab: (You can jump to the page for each Printer Function by clicking the function name in the list below.) ■ Job ■ HRC (High Resolution Control)* ■ TrueType Mode* The Printer Function list may differ depending on the model. * If you are using Windows® 95, 98 or Me, you can change settings of
  • Brother International HL-6050DN | Users Manual - English - Page 56
    . A small selection window appears on your computer. This will then let you make changes to the settings of the following functions: ■ Multiple Page ■ Manual Duplex (For HL-6050) ■ Duplex (For HL-6050D and HL-6050DN) ■ Toner Save Mode ■ Paper Source ■ Media Type Sleep Time When the printer does not
  • Brother International HL-6050DN | Users Manual - English - Page 57
    or 600 dpi. ■ Printer Default: The setting will match that of the printer. ■ Light ■ Medium ■ Dark. ■ Off: Turn HRC off TrueType Mode TrueType fonts may be sent to your printer in one of the following ways: ■ Download as TrueType ■ Download as Bit Image ■ Print as Graphics 2 - 7 DRIVER AND SOFTWARE
  • Brother International HL-6050DN | Users Manual - English - Page 58
    The Auto Detect function finds the currently installed optional unit devices and shows the available settings in the printer driver. When you click the Auto Detect button, options that are installed on the printer will be listed. You can manually add or remove options. Auto Detect function is not
  • Brother International HL-6050DN | Users Manual - English - Page 59
    you are using Windows NT® 4.0, Windows® 2000 or XP, you can access the Support tab by clicking Printing Preferences... in the General tab of the Brother HL-6050D/DN series Properties screen. 3 1 4 2 5 6 1 Displays the printer driver version. 2 Web Update You can check the brother web site for
  • Brother International HL-6050DN | Users Manual - English - Page 60
    driver. The screens in this section are based on HL-6050D with Windows® XP. The screens on your PC may vary depending on the printer model and your operating system. Ports tab Select the port where your printer is connected or the path to the network printer you are using. DRIVER AND SOFTWARE 2 - 10
  • Brother International HL-6050DN | Users Manual - English - Page 61
    Device Settings tab Select the options you have installed. 2 - 11 DRIVER AND SOFTWARE
  • Brother International HL-6050DN | Users Manual - English - Page 62
    Layout tab If you are using Windows NT® 4.0, Windows® 2000 or XP, you can access the Layout tab by clicking Printing Preferences... in the General tab of the Brother HL-6050D/DN BR-Script3 Properties screen. You can change the layout setting by selecting the settings for Orientation, Print on Both
  • Brother International HL-6050DN | Users Manual - English - Page 63
    Paper / Quality tab Select the Paper Source. 2 - 13 DRIVER AND SOFTWARE
  • Brother International HL-6050DN | Users Manual - English - Page 64
    If you are using Windows NT® 4.0, Windows® 2000 or XP, you can access the Brother HL-6050D/DN BR-Script3 laser printers cannot attain with resolutions of 300 or 600 dpi. ■ Printer Default: The setting will match that of the printer. ■ Light ■ Medium ■ Dark. ■ Off: Turn HRC off DRIVER AND SOFTWARE
  • Brother International HL-6050DN | Users Manual - English - Page 65
    Toner Save, which reduces the print density. Sleep Time When the printer does not receive data for a certain period of time (timeout), it enters sleep mode. Sleep mode acts as though the printer printer use. While the printer is in sleep mode, the light on the display is off, but the printer printer
  • Brother International HL-6050DN | Users Manual - English - Page 66
    For Macintosh® This printer supports Mac OS® 8.6 to 9.2 and Mac OS® X 10.1, 10.2 or greater. You can download the latest driver by accessing the Brother Solutions Center at http://solutions.brother.com The screens in this section are from Mac OS® X 10.1 The screens on your Macintosh® will vary
  • Brother International HL-6050DN | Users Manual - English - Page 67
    laser printers cannot attain with resolutions of 300 or 600 dpi. ■ Printer Default: The setting will match that of the printer. ■ Light ■ Medium ■ Dark. ■ Off: Turn HRC off Toner Save You can save running costs by turning on the Toner Save, which reduces the print density. 2 - 17 DRIVER AND SOFTWARE
  • Brother International HL-6050DN | Users Manual - English - Page 68
    mode acts as though the printer was turned off. The printer use. While the printer is in sleep mode, the light on the display is off, but the printer printer to start printing. Pressing one of the buttons will also wake up the printer Sleep Time Off to stop the printer going into sleep mode. The Sleep
  • Brother International HL-6050DN | Users Manual - English - Page 69
    Software (Windows® users) Software for Networks This section is for the HL-6050DN. BRAdmin Professional The BRAdmin Professional is a utility for managing your Brother network enabled printers that are running under Windows® 95/98/Me, Windows NT® 4.0 and Windows® 2000/XP. It allows you to easily
  • Brother International HL-6050DN | Users Manual - English - Page 70
    . If you typically use only one interface, we recommend that you select that interface in the INTERFACE menu. If only one interface is selected, the printer will allocate the entire input buffer to that interface. DRIVER AND SOFTWARE 2 - 20
  • Brother International HL-6050DN | Users Manual - English - Page 71
    factory settings on page 3-24. Changing the user settings does not affect the factory settings. You cannot modify the present factory settings. The changed user settings can be restored to the default factory settings with the RESET MENU menu. See RESET MENU on page 3-21. 2 - 21 DRIVER AND SOFTWARE
  • Brother International HL-6050DN | Users Manual - English - Page 72
    ) on the control panel. The display can show various messages with up to 16 characters in one row. The LED lights to indicate the current printer status. ■ The control panel with Braille symbols is optionally available in some countries. If you want to buy an optional control panel with Braille
  • Brother International HL-6050DN | Users Manual - English - Page 73
    to print the data that is left, you can cancel the job by pressing the Job Cancel button. Once the job has been cancelled the printer will return to the READY state. Job Cancel button You can cancel the processing or printing of data with the Job Cancel button. The display
  • Brother International HL-6050DN | Users Manual - English - Page 74
    printer. This document can then be reprinted by anyone who is on the network or at the printer control panel. You can use the Reprint button when the printer , the work area of the printer is decreased and the printer performance will be reduced. Make sure that you reset the RAM disk size to 0MB
  • Brother International HL-6050DN | Users Manual - English - Page 75
    setting is ON by using the control panel buttons to enter the SETUP menu. If you print with the driver we have supplied with the printer, the settings for Job Spooling in the printer driver will take priority over the settings made on the control panel. For more information, see Device Options on
  • Brother International HL-6050DN | Users Manual - English - Page 76
    or from the web-based management software. When you reprint PUBLIC data, see How to print Secure data on page 3-6. For more information about the settings in the printer driver, see Job Spooling on page 2-6. Printing Secure data Secure documents are protected by a password and only those people who
  • Brother International HL-6050DN | Users Manual - English - Page 77
    . Press the Set button to set the user name. Press the + or - button to select the job. Press the Set button to set the job. Type your password. Ignore this step if printing a Public File. Press the Set button to set the password The printer will exit this menu after a time-out period. Press
  • Brother International HL-6050DN | Users Manual - English - Page 78
    move through menus on the LCD If you press the + or - button when the printer is online (READY), it goes offline and the LCD displays the current mode. You the Set button to choose a setting, an asterisk appears briefly at the end of the display. Since the asterisk shows what you have chosen, you can
  • Brother International HL-6050DN | Users Manual - English - Page 79
    Light-emitting diode (LED) The LED is a light which shows the printer status. Data - Orange LED LED indication On Blinking Off Meaning Data is in the printer memory. Receiving or processing data. No data left in the memory. 3 - 8 CONTROL PANEL
  • Brother International HL-6050DN | Users Manual - English - Page 80
    Liquid Crystal Display (LCD) The display shows the current printer status. When you use the control panel buttons, the display will change. If there are any problems, the display shows the appropriate error message, maintenance message or call service message so you will know that you need to take
  • Brother International HL-6050DN | Users Manual - English - Page 81
    PROGRAMING-WAIT RAM SIZE=XX MB READY RESET TO FACTORY SETTINGS RESET TO USER SETTINGS RESOLUTION ADAPT SELF TEST SLEEP WARMING UP Meaning Printer is ignoring data processed using PS driver. Cancelling the job. The printer is setting up. The printer has suspended its operations. Press the Go
  • Brother International HL-6050DN | Users Manual - English - Page 82
    performed for 30 seconds, the LCD automatically returns to READY. ■ When you press the Set button to choose a setting, an asterisk appears at the end of the display for a short time. After that, the display returns to the previous menu level. ■ After changing the status or a setting, pressing the
  • Brother International HL-6050DN | Users Manual - English - Page 83
    READY Press any of the Menu buttons (+, -, Set or Back) to take the printer offline. INFORMATION PAPER Press the + or - button to move forward or backward through Set button. An asterisk * briefly appears at the end of the display. The default setting is indicated by an * 3 - 12 CONTROL PANEL
  • Brother International HL-6050DN | Users Manual - English - Page 84
    See PAPER on page 3-15. ■ QUALITY see QUALITY on page 3-15. ■ SETUP See SETUP on page 3-16. ■ PRINT MENU See PRINT MENU on page 3-17. ■ NETWORK See NETWORK (only on a Network) on page 3-20. ■ INTERFACE See INTERFACE on page 3-21. ■ RESET MENU See RESET MENU on page 3-21. CONTROL PANEL 3 - 13
  • Brother International HL-6050DN | Users Manual - English - Page 85
    ROM date. NET VER=#### Shows network version (only Network users). RAM SIZE=###MB Shows the size of memory in this printer. PAGE COUNTER =###### Shows the current total printed pages. DRUM COUNT =###### Shows the pages printed with drum unit. REMAIN DRUM =###### Shows the pages left to
  • Brother International HL-6050DN | Users Manual - English - Page 86
    MP FIRST MP SIZE MANUAL FEED TRAY1 SIZE TRAY2 SIZE DUPLEX QUALITY Display Shows RESOLUTION HRC TONER SAVE DENSITY Description =AUTO (HRC) offers improved print quality of letters, numbers and graphics that conventional laser printers cannot achieve, with a resolution of 300 or 600 dpi. =OFF/ON
  • Brother International HL-6050DN | Users Manual - English - Page 87
    the display. From Level 1=0.2 to Level 10=2.0. The factory setting is Level 1. OFF LASER JET/.... =OFF/ON =0, 1, 2 ... MB RESTART PRINTER? Deletes the data in CompactFlash® card. Subsetting Description SECURE FILE Selects the user name, job name and password. PUBLIC FILE Selects the user
  • Brother International HL-6050DN | Users Manual - English - Page 88
    , ENV.THIN, RECYCLED PAPER Sets the paper size to LETTER, A4, LEGAL, FOLIO, EXECUTIVE, COM-10, MONARCH, C5, DL, DLL, B5, A5, A6, B6, JIS B5, A4 LONG, POST line feed and carriage return will happen when the printer reaches the right margin. AUTO SKIP =ON/OFF Selects whether a line feed and carriage
  • Brother International HL-6050DN | Users Manual - English - Page 89
    PRINT AUTO LF AUTO MASK LEFT MARGIN RIGHT MARGIN TOP MARGIN BOTTOM MARGIN LINES Description =## Sets the right margin at column 10 to 80 columns at 10 cpi. =#.## Sets the top margin at a distance from the top edge of the paper: 0, 0.33, 0.5, 1.0, 1.5 or 2.0. The factory setting is 0.5. =#.## Sets
  • Brother International HL-6050DN | Users Manual - English - Page 90
    : CR →CR+LF, OFF: CR →CR =OFF/ON =OFF/ON Sets the left margin at column 0 to 70 columns at 10 cpi. Sets the right margin at column 10 to 80 columns at 10 cpi. Sets the top margin at a distance from the top edge of the paper - 0, 0.33, 0.5, 1.0, 1.5 or 2.0. The factory setting
  • Brother International HL-6050DN | Users Manual - English - Page 91
    (only on a Network) Display Shows TCP/IP NETWARE APPLETALK NETBEUI DLC/LLC NETBIOS/IP ENET Description Subsetting Description TCP/IP ENABLE =ON/OFF IP ADDRESS= SUBNET MASK= GATEWAY=
  • Brother International HL-6050DN | Users Manual - English - Page 92
    INTERFACE Display Shows SELECT AUTO IF TIME INPUT BUFFER PARALLEL USB 2.0 RESET MENU Display Shows RESET PRINTER FACTORY RESET Description =AUTO/PARALLEL/USB/NETWORK = 1, 2, 3 ... 99 (sec) You need to set the time-out period for the auto interface selection. = Level1, 2, 3 ... 15 Increases or
  • Brother International HL-6050DN | Users Manual - English - Page 93
    192.0.0.192* 123.0.0.192* 123.45.67.89 123.45.67.89* Press the + or - button until NETWORK appears (and to display each setting shown below). Press the Set button. Press the Set button. Press the + to complete the IP address. An asterisk appears at the end of the display. 3 - 22 CONTROL PANEL
  • Brother International HL-6050DN | Users Manual - English - Page 94
    language of the Hewlett-Packard LaserJet laser printer. Many software applications support this type of laser printer. Using this mode will allow your printer to operate at its best with those applications. BR-Script 3 Mode BR-Script is an original Brother page description language and a PostScript
  • Brother International HL-6050DN | Users Manual - English - Page 95
    COPY setting is always restored to the factory setting when the printer is turned off and on again. Network factory default setting If you wish to reset the print server back to its default factory settings (resetting all information such as the password and IP address information), hold down the
  • Brother International HL-6050DN | Users Manual - English - Page 96
    Table 3 - 1: List of factory settings Display Shows PAPER QUALITY SETUP Submenu SOURCE PRIORITY MP FIRST MP SIZE MANUAL FEED TRAY1 SIZE TRAY2 SIZE DUPLEX RESOLUTION HRC TONER SAVE DENSITY LANGUAGE PANEL CONTROL PRINT MENU ERROR BUZZER PANEL BUZZER BUZZER VOLUME POWER SAVE TIME AUTO CONTINUE LOCK
  • Brother International HL-6050DN | Users Manual - English - Page 97
    PITCH SYMBOLSET AUTO LF AUTO CR LEFT MARGIN RIGHT MARGIN TOP MARGIN BOTTOM MARGIN= LINES ERROR PRINT CARBON COPY Factory setting =59 =10.00/12.00 =PC8 =OFF =OFF =OFF =ON 59 =10.00/12.00 =US ASCII =OFF =OFF 59 =10.00/12.00 =PC8 =OFF =OFF OFF =OFF 3 - 26 CONTROL PANEL
  • Brother International HL-6050DN | Users Manual - English - Page 98
    3 - 1: List of factory settings (Continued) Display Shows NETWORK Submenu TCP/IP INTERFACE NETWARE APPLETALK NETBEUI DLC/LLC NETBIOS/IP automatically configures an IP address and subnet mask. For more details, see the Network User's Guide, which is provided on the CD-ROM. CONTROL PANEL 3 - 27
  • Brother International HL-6050DN | Users Manual - English - Page 99
    For visually-impaired users Buzzer indications The control panel has a buzzer. The buzzer will sound when one of the control panel buttons is pressed, or the status of the printer changes. See the table for a description of the buzzer meanings. Table 3 - 2: Buzzer indications list Buzz indications
  • Brother International HL-6050DN | Users Manual - English - Page 100
    you want to buy an optional control panel with Braille symbols, call the dealer you bought the printer from. The control panel buttons are marked with Braille characters for visually-impaired users as shown in the table. Table 3 - 3: Braille symbols list Button Go Abbreviations Go Braille* Job
  • Brother International HL-6050DN | Users Manual - English - Page 101
    4 Options Optional accessories and supplies This printer has the following optional accessories. You can increase the capabilities of the printer with these items. Options Lower tray unit LT-6000 Network board (For HL-6050/6050D) NC-6100h Wireless print server NC-7100w CompactFlash® card See
  • Brother International HL-6050DN | Users Manual - English - Page 102
    printer can hold up to 1100 sheets of plain paper. If you want to buy an optional lower tray unit, call the dealer you bought the printer from. Expands up to a total of 1100 sheets Figure 4-1 To install the lower tray unit, please see the User's Guide that we have supplied with the lower tray unit
  • Brother International HL-6050DN | Users Manual - English - Page 103
    BRAdmin Professional for the administrator and Brother network printing software, are included on the CD-ROM supplied with this printer. For setup, see the Network User's Guide. Installing the network board 1 Turn off the printer power switch, and then unplug the printer. 2 Slide and remove the side
  • Brother International HL-6050DN | Users Manual - English - Page 104
    4 Loosen the two screws, and then remove the Network cover plate. Figure 4-4 5 Put the network board connector firmly into the connector of the main controller board by aligning the two screws to the groove of the printer, and then secure it with the two screws. 6 Close the interface access cover.
  • Brother International HL-6050DN | Users Manual - English - Page 105
    4-7 8 Connect one end of the ethernet cable to the network port of the printer. 9 Plug the printer back in, and then turn on the power switch. 10 For details about how to use the Network board, please see the Network User's Guide on the CD-ROM that we have supplied with this printer. 4 - 5 OPTIONS
  • Brother International HL-6050DN | Users Manual - English - Page 106
    more information, see the NC-7100w Network User's Guide on the CD-ROM and the Quick Setup Guide that we have supplied with the NC-7100w wireless print server. Installing the network board 1 Turn off the printer power switch, and then unplug the printer if connected. Disconnect the interface cable
  • Brother International HL-6050DN | Users Manual - English - Page 107
    4 Loosen the two screws, and then remove the Network cover plate. Figure 4-10 5 Put the NC-7100w print server connector firmly into the connector of the main controller board by aligning the two screws to the groove of the printer, and then secure it with the two screws. 6 Close the interface
  • Brother International HL-6050DN | Users Manual - English - Page 108
    9 Make sure that the POWER LED of the print server is on. POWER LED Figure 4-12 10 For details about how to use the NC-7100w wireless print server, please see the Network User's Guide on the CD-ROM that we have supplied with NC-7100w. OPTIONS 4 - 8
  • Brother International HL-6050DN | Users Manual - English - Page 109
    to avoid serious damage or data loss. ■ IBM Microdrive® is not compatible. ■ For more information about the CompactFlash® card, call the dealer you bought the printer from or Brother customer service. ■ For the latest information, visit: http://solutions
  • Brother International HL-6050DN | Users Manual - English - Page 110
    Follow these steps to insert or remove a card: 1 Turn off the printer power switch, and then unplug the printer. 2 Insert the CompactFlash® card into the slot with the label facing to the power switch OFF, and then unplug the printer. To remove the card, pull it out of the printer. OPTIONS 4 - 10
  • Brother International HL-6050DN | Users Manual - English - Page 111
    DIMM The HL-6050, HL-6050D and HL-6050DN printers have 32 MB of standard memory and the printer. ■ For more information, call the dealer you bought the printer from or Brother Customer Service. ■ For the latest information and drivers, visit the Brother Solutions Center at http://solutions.brother.
  • Brother International HL-6050DN | Users Manual - English - Page 112
    additional memory When you install extra memory, follow these steps: 1 Turn off the printer power switch, and then unplug the printer. Disconnect the interface cable from the printer. Make sure you turn the power to the printer OFF before you install or remove the DIMM. 2 Slide and remove the side
  • Brother International HL-6050DN | Users Manual - English - Page 113
    5 Hold the DIMM on the side edges. Line up the notches on the DIMM with the DIMM slot. (Check that the locks on each side of the DIMM slot are open or facing outwards.) Figure 4-16 6 Press the DIMM straight into the slot (press firmly). Make sure the locks on each side of the DIMM click into place.
  • Brother International HL-6050DN | Users Manual - English - Page 114
    the interface cable to your printer. Plug the printer back in, and then turn on the printer power switch. To check that you have installed the DIMM properly, you can print the Printer Settings page that shows the current memory size. To print the Printer Settings page, see Support tab on page 2-9 or
  • Brother International HL-6050DN | Users Manual - English - Page 115
    instructions specific to your software. See your software manual if you need assistance. When you select fonts with a font selection command, embed the font selection command in your program. See the Technical Reference Guide. Please call a Brother authorized service to take the printer off line. 2
  • Brother International HL-6050DN | Users Manual - English - Page 116
    (Appears at intervals) See TONER LOW Message on page 5-2. TONER LIFE END See TONER LIFE END message on page 5-2. CHANGE DRUM SOON See CHANGE DRUM SOON message on page 5-8. Accessories Toner Cartridge Drum Unit See Toner cartridge on page 5-2. See Drum unit on page 5-8. ROUTINE MAINTENANCE
  • Brother International HL-6050DN | Users Manual - English - Page 117
    out of toner or the toner is not evenly distributed inside the cartridge. For both conditions the printer will stop printing, until a new toner cartridge has been put into the printer. TONER LIFE END can only be cleared, by putting a new toner cartridge into the drum unit. 5 - 2 ROUTINE MAINTENANCE
  • Brother International HL-6050DN | Users Manual - English - Page 118
    or Brother customer service. We recommend that you clean the printer when you replace the toner cartridge. See Cleaning on page 5-14. 1 Press the cover release button and then open the front cover of the printer. Figure 5-1 2 Take out the drum unit assembly (drum unit with toner cartridge). Figure
  • Brother International HL-6050DN | Users Manual - English - Page 119
    prevent damage to the printer from static electricity, do not touch the electrodes shown in Figure 5-3. Figure 5-3 3 Push down the blue lock lever and take the toner cartridge out of the drum unit assembly. Figure 5-4 Caution Handle the toner cartridge carefully. If toner scatters on your hands or
  • Brother International HL-6050DN | Users Manual - English - Page 120
    toner cartridges with only Genuine Brother Branded Supplies. ■ Printing with a third-party toner or third-party toner cartridge may reduce not only the print quality but also the quality and life of the printer itself. It may also cause serious damage to the performance and life of a drum unit
  • Brother International HL-6050DN | Users Manual - English - Page 121
    firmly into the drum unit until you hear it lock into place. If you put it in properly, the lock lever will lift automatically. Figure 5-8 Caution Make sure you insert the toner cartridge properly or it may separate from the drum unit. 7 Gently wipe the scanner window with a dry, soft cloth
  • Brother International HL-6050DN | Users Manual - English - Page 122
    several times. Return the tab to the home position (▲) before you put the drum unit back in the printer. If you do not, printed pages may have a vertical stripe. Figure 5-10 9 Put the drum unit assembly back in the printer. Close the front cover of the printer. Figure 5-11 ROUTINE MAINTENANCE 5 - 7
  • Brother International HL-6050DN | Users Manual - English - Page 123
    genuine Brother toner. The printer should be used only in a clean, dust-free environment with adequate ventilation. ■ Printing with a third-party drum unit may reduce not only the print quality but also the quality and life of the printer itself. Warranty coverage does not apply to problems caused
  • Brother International HL-6050DN | Users Manual - English - Page 124
    1 Press the cover release button and then open the front cover of the printer. Figure 5-12 2 Take out the drum unit assembly (drum unit with the toner cartridge). Figure 5-13 Caution ■ We recommend that you place the drum unit assembly on a piece of disposable paper or cloth in case you accidentally
  • Brother International HL-6050DN | Users Manual - English - Page 125
    up the drum unit tightly in a bag so that toner powder does not spill out of the unit. 4 Unpack the new drum unit. Caution Wait to unpack a drum unit until immediately before you put it in the printer. Exposure to direct sunlight or room light may damage the drum unit. 5 - 10 ROUTINE MAINTENANCE
  • Brother International HL-6050DN | Users Manual - English - Page 126
    Caution Make sure you insert the toner cartridge properly, or it may separate from the drum unit when you pick up the drum unit assembly. 6 Gently wipe the scanner window with a dry, soft cloth. Figure 5-19 7 Put the drum unit assembly in the printer. Make sure that the printer is turned on and the
  • Brother International HL-6050DN | Users Manual - English - Page 127
    8 Reset the drum counter. See the instructions supplied with the new drum unit. Caution Do not reset the drum counter when you replace only the toner cartridge. 9 Close the front cover of the printer. 5 - 12 ROUTINE MAINTENANCE
  • Brother International HL-6050DN | Users Manual - English - Page 128
    LASER Item Paper feeding kit for MP tray *1 Paper feeding kit for Tray 1 *2 Paper feeding kit for Tray 2 *2 Fuser unit Scanner unit Approximate Life 100,000 pages *3 100,000 pages *3 100,000 pages *3 150,000 pages *3 200,000 pages To Purchase Replacement Call Customer Service Call Customer
  • Brother International HL-6050DN | Users Manual - English - Page 129
    Cleaning Clean the outside and inside of the printer with a dry soft cloth. When you replace the drum unit, make sure you clean the inside of the printer. If printed pages are stained with toner, clean the inside of the printer with a dry soft cloth. ■ Use neutral detergents. Cleaning with volatile
  • Brother International HL-6050DN | Users Manual - English - Page 130
    the inside of the printer as follows: 1 Turn off the printer power switch, and then unplug the printer power cord. 2 Press the cover release button and then open the front cover of the printer. Figure 5-24 3 Take out the drum unit assembly (drum unit with the toner cartridge). Figure 5-25 ROUTINE
  • Brother International HL-6050DN | Users Manual - English - Page 131
    4 Wipe the scanner window with a dry, soft cloth. Figure 5-26 5 Put the drum unit assembly in the printer. 6 Close the front cover. 7 Plug the printer power cord back in, and then turn the printer power switch back on. 5 - 16 ROUTINE MAINTENANCE
  • Brother International HL-6050DN | Users Manual - English - Page 132
    print quality problems, please clean the corona wire as follows: 1 Turn off the printer power switch, and then unplug the printer power cord. 2 Press the cover release button and then open the front cover of the printer. 3 Take out the drum unit assembly (drum unit with the toner cartridge). Caution
  • Brother International HL-6050DN | Users Manual - English - Page 133
    the printer again. See Replacing the toner cartridge on page 5-3. The istalled network board is not compatible. Please install the recommended network board. The firmware version of the installed network board is not up to date. Please update the firmware by accessing the Brother Solutions Center
  • Brother International HL-6050DN | Users Manual - English - Page 134
    FRONT COVER OPEN FUSER COVER OPEN IGNORE DATA JAM XXX MANUAL FEED MEDIATYPE ERROR MEMORY FULL NO DX TRAY NO PAPER XXX NO TRAY XXX PRINT OVERRUN SIZE ERROR DX SIZE ERROR T1/T2 SIZE MISMATCH STORAGE FULL TRAY 1 ERROR TRAY 2 ERROR TONER LIFE END Action Close the front cover of the printer. Close the
  • Brother International HL-6050DN | Users Manual - English - Page 135
    FUSER REPLACE LASER Action The drum unit is almost at the end of life. Prepare a new drum unit. See CHANGE DRUM SOON message on page 5-8. Purchase a new toner cartridge and have it ready before you get a TONER LIFE END message. To replace the toner cartridge, see Replacing the toner cartridge
  • Brother International HL-6050DN | Users Manual - English - Page 136
    separation pad needs to be replaced. Please call your dealer or Brother customer service for a replacement. ■ Fan the paper well and put it back in firmly. ■ Make sure you have chosen the manual feed mode in the printer driver. ■ The printer can load envelopes from the multi-purpose tray. You must
  • Brother International HL-6050DN | Users Manual - English - Page 137
    in the back output tray Paper jam in the duplex unit Paper may jam in the paper tray, inside the printer, in the back output tray or where the paper comes out of the printer. Check where the jam is and follow the instructions on the next few pages to remove the jammed paper
  • Brother International HL-6050DN | Users Manual - English - Page 138
    the cover release button and then open the front cover of the printer. 2 Take out the drum unit assembly (drum unit with the toner cartridge). 3 Remove the paper from the multi-purpose tray. 4 Fan Open the front cover of the printer and close it, or press Go to start printing. TROUBLESHOOTING 6 - 6
  • Brother International HL-6050DN | Users Manual - English - Page 139
    TRAY 1 TRAY 2 JAM TRAY1 JAM TRAY2 If a paper jam occurs inside the paper tray, follow these steps: 1 Pull the paper tray completely out of the printer. Figure 6-3 6 - 7 TROUBLESHOOTING
  • Brother International HL-6050DN | Users Manual - English - Page 140
    paper mark (▼). While pressing the [blue] paper-guide release lever, slide the paper guides to fit the paper size. Check that the guides are firmly in the slots. 4 Put the paper tray firmly back in the printer. 5 Open the front cover of the printer, and then close it to resume printing. Caution
  • Brother International HL-6050DN | Users Manual - English - Page 141
    the fuser or the fixing roller. Figure 6-6 If a paper jam occurs inside the printer, follow these steps: 1 Press the cover release button and then open the front cover of the printer. Figure 6-7 2 Take out the drum unit assembly (drum unit with the toner cartridge). 6 - 9 TROUBLESHOOTING Figure
  • Brother International HL-6050DN | Users Manual - English - Page 142
    6-9 3 Use both hands to slowly pull out the jammed paper. Figure 6-10 4 Push down the blue lock lever of the drum unit assembly and take the toner cartridge out of the drum unit assembly. Remove a piece of jammed paper if there is any inside the drum unit. Figure 6-11 TROUBLESHOOTING 6 - 10
  • Brother International HL-6050DN | Users Manual - English - Page 143
    cartridge carefully. If toner scatters on your hands or clothes, wipe or wash it off with cold water immediately. ■ Do not touch the shaded parts shown in Figure 6-12 and 6-13 to avoid any degradation to the print quality. Figure 6-12 Figure 6-13 5 Put the drum unit assembly back in the printer
  • Brother International HL-6050DN | Users Manual - English - Page 144
    have just used the printer, some parts inside the printer are extremely hot. When you open the front cover of the printer, never touch the fuser or the fixing roller. the printer. Figure 6-15 2 Take out the drum unit assembly (drum unit with the toner cartridge). Figure 6-16 TROUBLESHOOTING 6 - 12
  • Brother International HL-6050DN | Users Manual - English - Page 145
    Caution ■ We recommend that you place the drum unit assembly on a piece of disposable paper or cloth in case you accidentally spill or scatter toner. ■ To prevent damage to the printer from static electricity, do not touch the electrodes shown in Figure 6-17. Figure 6-17 3 Use both hands to slowly
  • Brother International HL-6050DN | Users Manual - English - Page 146
    at the left and right hand sides. Pull the jammed paper out of the fuser unit. Jam clear cover Figure 6-21 7 Close the jam clear cover. 8 Close the back output tray. 9 Put the drum unit assembly back in the printer (press firmly). 10 Close the front cover of the printer. TROUBLESHOOTING 6 - 14
  • Brother International HL-6050DN | Users Manual - English - Page 147
    ) JAM DUPLEX Follow the instructions below to clear a paper jam: 1 Open the back output tray. Figure 6-22 2 Use both hands to slowly pull the jammed paper out of the fuser unit. Figure 6-23 3 Close the back output tray. If the paper jam cannot be cleared, go to the next step. 6 - 15 TROUBLESHOOTING
  • Brother International HL-6050DN | Users Manual - English - Page 148
    the duplex tray and paper tray out of the printer. Figure 6-24 5 Pull the jammed paper out of the printer. Figure 6-25 6 Put the duplex tray and paper tray back in the printer. Figure 6-26 ■ The JAM DUPLEX message appears and the printing will be out of position on the page. TROUBLESHOOTING 6 - 16
  • Brother International HL-6050DN | Users Manual - English - Page 149
    the appropriate media type in the printer driver. See What kind of paper can I use? on page 1-5. ■ Put in a new toner cartridge. See Replacing the toner cartridge on page 5-3. ■ Put in a new drum unit. See Replacing the drum unit on page 5-8. ■ The fuser unit may be contaminated. Call customer
  • Brother International HL-6050DN | Users Manual - English - Page 150
    that meets our specifications. See What kind of paper can I use? on page 1-5. ■ Choose Thick paper mode in the printer driver, or use thinner paper than you are currently using. ■ Check the printer's environment because conditions such as high humidity can cause hollow print. See Positioning the
  • Brother International HL-6050DN | Users Manual - English - Page 151
    drum unit may be damaged. Put in a new drum unit. See Replacing the drum unit on page 5-8. ■ You may clear the problem by wiping the scanner window with a soft cloth. See Cleaning the inside of the printer on page 5-15 or the Maintenance Tutorial video on the supplied CD-ROM. ■ The toner cartridge
  • Brother International HL-6050DN | Users Manual - English - Page 152
    . ■ The problem may disappear by itself. Print multiple pages to clear this problem, especially if the printer has not been used for a long time. ■ The drum unit may be damaged. Put in a new drum unit. See Replacing the drum unit on page 5-8. White lines across the page TROUBLESHOOTING 6 - 20
  • Brother International HL-6050DN | Users Manual - English - Page 153
    the dust or paper powder on the surface comes off. Caution Do not try to clean the surface of the photosensitive drum with a sharp object, such as a ball-point pen, and so on. ■ The drum unit may be damaged. Put in a new drum unit. See Replacing the drum unit on page 5-8. 6 - 21 TROUBLESHOOTING
  • Brother International HL-6050DN | Users Manual - English - Page 154
    is also connected to a storage device or scanner. Take away all other devices and connect the port only to the printer. ■ Turn off the Status Monitor in the Device Options tab in the Windows® printer driver. See Device Options on page 2-5. ■ Press the Go button to print the data that is left in the
  • Brother International HL-6050DN | Users Manual - English - Page 155
    the Printer folder, select the printer you use. 2. Press the Advanced button on the PostScript® tab. 3. Select 'Tagged binary communication protocol' in data format. Caution If you do not follow the instructions for using the printer, you may be responsible for all repairs. 6 - 23 TROUBLESHOOTING
  • Brother International HL-6050DN | Users Manual - English - Page 156
    code) Printer specifications Engine Print method Laser Resolution Print speed First print time Warm up Electrophotography by semiconductor laser-beam scanning Wave length: 780 nm Pulse duration: 20 ns Output: 10 mW max. Windows® 95/98/Me, Windows NT® 4.0, Windows® 2000 and Windows® XP 1200
  • Brother International HL-6050DN | Users Manual - English - Page 157
    , Windows NT® 4.0, Windows® 2000 and Windows® XP Macintosh® BR-Script 3 (PPD file) for Mac OS® 8.6 to 9.2 and Mac OS® X 10.1, 10.2 or greater Linux GDI printer driver for Linux BR-Script 3 (PPD file) for Linux Interactive Help* Driver Deployment Wizard** * Instructional animations for problem
  • Brother International HL-6050DN | Users Manual - English - Page 158
    sheets Manual duplex Automatic duplex for HL-6050D and HL-6050DN unit (Option) (LT-6000) Automatic duplex printing Multi-purpose tray Paper tray (Standard) Lower tray unit ), Executive, Folio A4, Letter, Legal ** Up to 10 sheets Supplies Toner Drum 7,500 pages A4/Letter pages @ 5 % coverage 30
  • Brother International HL-6050DN | Users Manual - English - Page 159
    Standby Less than 90 W at 25 °C (77 °F) Sleep Less than 10 W (For HL-6050DN) Less than 8 W (For HL-6050 and HL-6050D) Off Less than 2 W (The only way to achieve 0 W Windows® 95*, 98, 98SE NT® Workstation 4.0* 2000 Professional Me XP Apple® Macintosh®** OS® 8.6 - 9.2 OS® X 10.1 - 10.2.1
  • Brother International HL-6050DN | Users Manual - English - Page 160
    suitable for laser printers. Basis weight The basis weight of the paper in general use varies in different countries. We recommend that you use paper that weighs 75 g/m2 to 90 g/m2 (20 to 24 lb), although this printer is able to cope with thinner or thicker paper than these weights. Unit g/m2 lb
  • Brother International HL-6050DN | Users Manual - English - Page 161
    the characteristic of the paper changes greatly. The fixing of the toner may become worse. For storage of the paper and during use 28 32 36 43 Letter Legal Executive A4 A5 A6 Envelope Monarch Envelope #9 Envelope #10 Envelope #11 Envelope DL Envelope C5 Envelope C6 Envelope B5 (ISO) Envelope B6
  • Brother International HL-6050DN | Users Manual - English - Page 162
    Quick reference for bar code control commands The printer can print bar codes in the HP LaserJet, EPSON FX- n". For more information about parameters, see the following Definition of Parameters. This command must end with the " \ " code (5CH). Definition of Parameters This bar code command can have
  • Brother International HL-6050DN | Users Manual - English - Page 163
    drawing & box drawing ''S'' 1 = Black 2 = Vertical stripes 3 = Horizontal stripes 4 = Cross hatch Bar Code n = 'mnnn' or 'Mnnn' (nnn = 0 ~ 32767) This parameter shows the bar code width. The unit of 'nnn' is a percentage. A - 8 APPENDIX (SPECIFICATIONS, FONTS AND BAR CODE)
  • Brother International HL-6050DN | Users Manual - English - Page 164
    the printer prints the human readable line below the bar code. Human readable characters are always printed with OCR-B font of 10 pitch 'Xnnn' This parameter shows the offset from the left margin in the 'u'- or 'U'-specified unit. Bar code & expanded character offset in Y-axis n = 'ynnn' or 'Ynnn'
  • Brother International HL-6050DN | Users Manual - English - Page 165
    bar codes is shown in the 'u'- or 'U'-specified unit. The factory setting of the bar code height (12 code data. Bar code data must end with the ' \ ' code (5CH), which also ends this command. The acceptable bar code code data automatically starts and ends with an asterisk ' * ' (start character
  • Brother International HL-6050DN | Users Manual - English - Page 166
    , if the bar code data has odd characters, '0' is automatically added to the end of the bar code data. ■ When FIM (US-Post Net) is selected with as normal print data. If the check digit is not correct, the printer calculates the correct check digit automatically so that the correct bar code data
  • Brother International HL-6050DN | Users Manual - English - Page 167
    ■ When Codebar is chosen with the parameter 't9' or 'T9' Characters '0' to '9 can be printed. Characters 'A' to 'D' can be printed as a start-stop code, which can be upper case or lower case. If there is no start-stop code, errors will happen. A check digit cannot be added and using '?' causes
  • Brother International HL-6050DN | Users Manual - English - Page 168
    'L' Data that follows 'l' or 'L' is read as expanded character data (or labeling data). Expanded character data must end with the ' \ ' code (5CH), which also ends this command. Example Program Listings WIDTH "LPT1:",255 'CODE 39 LPRINT CHR$(27);"it0r1s0o0x00y00bCODE39?\"; 'Interleaved 2 of 5 LPRINT
  • Brother International HL-6050DN | Users Manual - English - Page 169
    printer needs. You can download the latest drivers, software and utilities, read FAQs and troubleshooting tips, and go to the Solutions section to learn how to get the most from your Brother product. http://solutions.brother.com You can check here for the Brother driver updates. Customer Service
  • Brother International HL-6050DN | Users Manual - English - Page 170
    PRODUKT This printer has a Class 3B laser diode which produces invisible laser radiation in the scanner unit. You should not open the scanner unit under any circumstances. Caution: Use of controls or adjustments or performance of procedures other than those specified in this User's Guide may result
  • Brother International HL-6050DN | Users Manual - English - Page 171
    supplied three-pin plug must be inserted only into a standard three-pin power outlet that is properly grounded through the standard electrical wiring. Extension cords used with this printer completely. Caution for LAN connection (For model HL-6050DN only) Connect this product to a LAN connection
  • Brother International HL-6050DN | Users Manual - English - Page 172
    -ku, Nagoya 467-8561, Japan Plant Brother Technology (Shenzhen) Ltd. NO6 Gold Garden Ind. Nanling Buji, Longgang, Shenzhen, China Herewith declare that: Product description Product Name Model Number : Laser Printer : HL-6050, HL-6050D, HL-6050DN : HL-60 are in conformity with provisions of
  • Brother International HL-6050DN | Users Manual - English - Page 173
    your Printer needs. You can download the latest software and utilities, read FAQs and troubleshooting tips, and go to the 'Solutions' section to learn how to get the most from your Brother product. http://solutions.brother.com You can check here for the Brother driver updates. Customer Service In
  • Brother International HL-6050DN | Users Manual - English - Page 174
    800-521-2846 Internet Addresses Brother Global Web Site: http://www.brother.com For Frequently Asked Questions (FAQs), Product Support and Technical Questions, and Driver Updates and Utilities: http://solutions.brother.com (In USA Only) For Brother Accessories & Supplies: http://www.brothermall.com
  • Brother International HL-6050DN | Users Manual - English - Page 175
    : Brother International Corporation 100 Somerset Corporate Boulevard P.O. Box 6911 Bridgewater, NJ 08807-0911 USA Telephone: (908) 704-1700 declares, that the products Product name: Model number: Product options: Laser Printer HL-6050D and HL-6050DN HL-60 Lower Tray Unit LT-6000, Network Board
  • Brother International HL-6050DN | Users Manual - English - Page 176
    States. One of the following labels on the back of the printer indicates compliance with the FDA regulations and must be attached to laser products marketed in the United States. MANUFACTURED: Brother Industries, Ltd., 15-1 Naeshiro-cho Mizuho-ku Nagoya, 467-8561 Japan This product complies with
  • Brother International HL-6050DN | Users Manual - English - Page 177
    supplied three-pin plug must be inserted only into a standard three-pin power outlet that is properly grounded through the standard electrical wiring. Extension cords used with this printer completely. Caution for LAN connection (For model HL-6050DN only) Connect this product to a LAN connection that is not
  • Brother International HL-6050DN | Users Manual - English - Page 178
    A-7 Bar code package (option 4-15 BRAdmin Professional 2-19 Brother Solutions Center 2-1 BR-Script 2-1 BR-Script 3 menu 3-19 BR-Script 3 mode 3-23 BR-Script 3 problems 6-23 BR-Script printer driver 2-10 Buttons 3-2 C Call Service messages 6-3 Carbon copy printing 1-42 Carton contents
  • Brother International HL-6050DN | Users Manual - English - Page 179
    driver 2-1, 2-10 Public data 3-5 Q QUALITY menu 3-15, 3-25 R RAM 4-11 Recommended paper 1-7 Register your printer B-1, C-1 Reprint button 3-2, 3-3 RESET menu 3-21 S Secure data 3-5 SETUP menu 3-16, 3-25 Software 2-19 Status Monitor 2-6 T TCP/IP 3-20 Thick paper 1-17 Toner cartridge
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
Brother Laser Printer
HL-6050
HL-6050D
HL-6050DN
User's Guide
Version 2
For visually-impaired users
You can read this manual with Screen Reader ‘text-to-speech’
software.
You must set up the hardware and install the driver before you can use the printer.
Please use the Quick Setup Guide to set up the printer. You can find a printed copy in the box or view
it on the CD-ROM we have supplied.
Please read this User’s Guide thoroughly before you use the printer. Keep the CD-ROM in a
convenient place so you can use it quickly if you need to.
Please visit our web site at http://solutions.brother.com
where you can get answers to Frequently
Asked Questions (FAQs), Product Support and Technical Questions, and the latest Driver Updates
and Utilities.