Brother International HL-6050DN Users Manual - English - Page 34
Basic, Paper, DL Long Edge, During printing
UPC - 012502609568
View all Brother International HL-6050DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
6 Press and slide the paper width guide to fit the envelope size. Figure 1-33 DL size double-flap envelopes ■ If the DL size double flap envelope is creased after printing, go to the Basic tab, select Paper Size and then select DL Long Edge. Put a new DL size double-flap envelope in the MP tray with the longest edge of the envelope in first, then print again. When you put envelopes in the MP tray, please remember the following; ■ During printing, the inside tray rises to feed envelopes into the printer. ■ The side to be printed on must be face up. ■ Put the leading edge (top of the paper) in first and push it gently into the tray. ■ The top of the envelope stack must be under the maximum paper height guides that are on both sides of the tray. 7 Send the print data to the printer. 8 After you finish the print job, close the back output tray. ABOUT THIS PRINTER 1 - 26