Brother International HL-6050DN Users Manual - English - Page 98
Network, Tcp/ip, Appletalk, Netbeui, Dlc/llc, Netbios/ip, Interface, Select, Auto If Time - configuration page
UPC - 012502609568
View all Brother International HL-6050DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Table 3 - 1: List of factory settings (Continued) Display Shows NETWORK Submenu TCP/IP INTERFACE NETWARE APPLETALK NETBEUI DLC/LLC NETBIOS/IP ENET SELECT AUTO IF TIME INPUT BUFFER PARALLEL USB 2.0 Factory setting Subsetting TCP/IP ENABLE IP ADDRESS SUBNET MASK GATEWAY IP BOOT TRIES IP METHOD APIPA NETWARE ENABLE NET FRAME =ON =ON =ON =ON =AUTO =AUTO =5 =LEVEL 3 Subsetting HIGH SPEED BI-DIR INPUT PRIME HIGH SPEED Factory setting =ON =169.254.###.### *1 =255.255.0.0 *1 =0.0.0.0 =3 =AUTO =ON =ON =AUTO Factory setting =ON =ON =OFF =ON *1 Automatic Private IP Addressing (APIPA) protocol automatically configures an IP address and subnet mask. For more details, see the Network User's Guide, which is provided on the CD-ROM. CONTROL PANEL 3 - 27
CONTROL PANEL
3 - 27
*
1
Automatic Private IP Addressing (APIPA) protocol automatically configures an IP address and subnet mask.
For more details, see the Network User's Guide, which is provided on the CD-ROM.
NETWORK
TCP/IP
Subsetting
Factory setting
TCP/IP ENABLE
=ON
IP ADDRESS
=169.254.###.### *
1
SUBNET MASK
=255.255.0.0 *
1
GATEWAY
=0.0.0.0
IP BOOT TRIES
=3
IP METHOD
=AUTO
APIPA
=ON
NETWARE
NETWARE ENABLE
=ON
NET FRAME
=AUTO
APPLETALK
=ON
NETBEUI
=ON
DLC/LLC
=ON
NETBIOS/IP
=ON
ENET
=AUTO
INTERFACE
SELECT
=AUTO
AUTO IF TIME
=5
INPUT BUFFER
=LEVEL 3
PARALLEL
Subsetting
Factory setting
HIGH SPEED
=ON
BI-DIR
=ON
INPUT PRIME
=OFF
USB 2.0
HIGH SPEED
=ON
Table 3 - 1: List of factory settings
(Continued)
Display Shows
Submenu
Factory setting