Brother International MFC-6650MC Users Manual - English - Page 33

19 M F C S E T U P A N D C O N N E C T I O N S Paper Capacity in Feeder Multi-purpose Sheet Feeder: Up to 0.87 inch (22 mm) in height (up to the mark) Approx. 200 sheets of 20 lb. (75 g/m2) or 50 sheets of 42 lb. (158 g/m2) Letter/A4 paper, or 10 envelopes Output Tray: Basis Weight Caliper Moisture Content Smoothness (Sheffield) Recommended paper types: Cut sheet: Label: Transparency: Approx. 100 sheets of 20 lb. (75 g/m2) Letter/A4 paper Cut Sheet Envelope 16 to 42 lb. (60 to 158 g/m2) 20 to 24 lb. (75 to 90 g/m2) single thickness ±0.03 to ±0.08 in. (0.08 to 0.2 mm) 0.0033 to 0.0058 in. (0.084 to 0.14 mm) single thickness 4% to 6% by weight 4% to 6% by weight 100 to 250 (Sheffield) 100 to 250 Xerox 4200 Avery laser label or equivalent 3M CG3300 for laser printers or equivalent Connecting an External Telephone Answering Device (TAD) Sequence You might choose to connect an additional answering system. When you have an external TAD on the same telephone line as the MFC, the TAD answers all calls. The MFC "listens" for fax calling (CNG) tones. If it hears them, the MFC takes over the call and receives the fax. If it doesn't hear CNG tones, the MFC lets the TAD continue playing your outgoing message so your caller can leave you a voice message. The TAD must answer within four rings (the recommended setting is two rings). The MFC cannot hear CNG tones until the TAD has answered the call, and with four rings there are only 8-10 seconds of CNG tones left for the fax "handshake." Make sure you carefully follow the instructions in this manual for recording your outgoing message.