Brother International MFC 9880 Owners Manual - Page 154
Replacing the Toner Cartridge, Toner Empty Indicator, Steps for Replacing Toner Cartridge
View all Brother International MFC 9880 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
Replacing the Toner Cartridge The machine can print up to 6,000 pages using a high yield toner cartridge (TN-6600). When the toner cartridge is running low, the display shows CHANGE TONER. The machine is supplied with a standard toner cartridge (TN-6300) that must be replaced after approximately 3,000 pages. Actual page count will vary depending on your average document type. It is a good idea to keep a new toner cartridge ready for use when you see the toner low warning. Discard the used toner cartridge according to local regulations. If you are not sure of them, consult with Brother dealer for service. Be sure to seal the toner cartridge tightly so toner powder does not spill out of the cartridge. When discarding used toner cartridges, keep them separate from domestic garbage. It is recommended that you clean the machine when you replace the toner. Toner Empty Indicator When the toner cartridge is running low, the display shows CHANGE TONER and the Toner Empty LED on the control panel flashes on and off to indicate the toner is low. Display Toner Empty LED 123 4 56 789 0 The Toner Empty LED light stays on and the display shows TONER EMPTY to indicate that the toner is empty. Once this indication appears, the machine will not resume printing until you have installed a new toner cartridge. Steps for Replacing Toner Cartridge After you have just used the machine, some internal parts of the machine will be extremely HOT! So, never touch the shaded parts shown in the illustration below. MAINTENANCE HOT! Front view Troubleshooting and Maintenance 145