Brother International MFC 9880 Owners Manual - Page 60
Remote Commands, Change Fax Forwarding Setting, Retrieve or Erase a Fax, Check the Receiving Status
View all Brother International MFC 9880 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
ADVANCED FAX USE Remote Commands Follow the commands below to access features remotely. When you call the machine and enter your Remote Access Code (the factory setting is 1 5 9 ), the system will signal you with two short beeps to enter a remote control command. Change Fax Forwarding Setting Press 9 5 then to Turn Fax Forwarding OFF-Press 1. Turn Fax Forwarding ON-Press 2. Program Fax Forward Number-Press 4. Automatically turns Fax Forwarding ON. Turn Fax Storage ON-Press 6. Turn Fax Storage OFF-Press 7. (This is only possible if there are no faxes stored in the memory, or if all faxes have been erased using Remote Control 9 6 3). Retrieve or Erase a Fax Press 9 6 then to Retrieve all faxes-Press 2, then enter the number of remote fax machine and then press # #. After the beep, hang up and wait. Erase all fax messages-Press 3. If the data stored in the memory has not been printed before, it will be printed first and then erased. Check the Receiving Status Press 9 7 then Press 1. 1 long beep-Received fax messages. 3 short beeps-No messages. Change Receive Mode Press 9 8 then for TAD-Press 1. F/T (FAX/TEL)-Press 2. FAX-Press 3. Exit Remote Operation Press 9 0 Remote Fax Options 51